Jump to content
SAU Community

Recommended Posts

what would a 33gtst with some slicks do with 360 - 380 rwkw ?

bit off topic.. just wondering what i should be aiming for

Well with that type of power and slicks and a good start, a 10 would have to be on the cards. Would be difficult to achieve but if driven correctly you would have to go close.

what would a 33gtst with some slicks do with 360 - 380 rwkw ?

bit off topic.. just wondering what i should be aiming for

It will be a fair bit quicker than the GTR with the same power as long as you use drag slicks . You should do a 10 with little practice on starts .

I know some people will argue otherwise....before you ask why the GTS is lighter and you have a lot less drag because you are only spinning 2 wheels not four .

This is the reason GTRS with the same power as STI's have a better 60ft time . The suby is a true 4WD, the GTR is not .

Of course if the GTS and the R both have street tyres the R will be quicker ET but the GTS will have higher trap speed .

As for a street GTR with 300 RWKW ( even 300AWKW for that matter) doing a flat 11, I would like to see that , you don't have a hope in hell ....as long as the car is full street weight you won't go near it.

Series 3 R33 gtr FULL street trim, 368awkw=11.1@130mph. This was on 19's with average driver, shit rubber, i dont have the timeslip so cant tell you the 60 foot time but i can tell you there is spin and torque steer in 1st gear so could go quicker on better rubber.

Edited by fieds83
Series 3 R33 gtr FULL street trim, 368awkw=11.1@130mph. This was on 19's with average driver, shit rubber, i dont have the timeslip so cant tell you the 60 foot time but i can tell you there is spin and torque steer in 1st gear so could go quicker on better rubber.

This has a 10 on street tyres with a resonable 60 footer. We did 11 flat at 129 MPH in a series III GTR , street tyres, full street trim, weight and 18" 34 GTR rims , the car was making about 360 AWKW . Never went bact to crack a 10 because of the cage issue, car was built to be a street stock looking car , not a drag or race car..

Spiining all the way in 1st, still managed 1.8 60ft.

tough subject... im thinking of taking my new beast out to the strip...

what you think id get in an R34GTR vspec, mods are: HKS 100mm FMIC, HKS cat back with punched out cat, HKS ebc on 1 bar, aftermarket panel filter (not sure which brand), HKS coilovers, tyres are 285's all round pretty good tyres again not sure wat brand... what wud i be looking at running??? oh and car is running with a mines rom tune, made around 240awkw

Edited by mass_iv

thanks mate, yeh i do, not many good ones yet, but here's a link to a good shot taken before i bought it... has diff plates on it now:

http://transelite.net/images/PICT0392.JPG

others are off camera phone the night i picked it up... little dodgy hehe:

http://img219.imageshack.us/my.php?image=picture008qc2.jpg

http://img223.imageshack.us/my.php?image=image006vq0.jpg

Edited by mass_iv
tough subject... im thinking of taking my new beast out to the strip...

what you think id get in an R34GTR vspec, mods are: HKS 100mm FMIC, HKS cat back with punched out cat, HKS ebc on 1 bar, aftermarket panel filter (not sure which brand), HKS coilovers, tyres are 285's all round pretty good tyres again not sure wat brand... what wud i be looking at running??? oh and car is running with a mines rom tune, made around 240awkw

Flat 12 @ 114 MPH

thanks jerry i thought so... id be pretty happy with that... u seem to know wat u are talking about... hows your beast? i remember the day u came over i was like :) that color is awesome and the interior is sex!!!

thanks jerry i thought so... id be pretty happy with that... u seem to know wat u are talking about... hows your beast? i remember the day u came over i was like :) that color is awesome and the interior is sex!!!

You will need a little practice on your starts to do that but as you don't have heaps of power it will be easy, you just need the right RPM so you get enough wheel-spin not to bog down and not to much so you don't move .. R34's are a little quicker than 33's ( both same power cars ) because of the 6 speed box . It has beeter gear ratios and you don't go into 5th so you change the same amount of gears..

My car is still going great, no issues there but I don't get to drive it much, I'm not going to do any mods to it , I'm happy as it is .

I may look at the new GTR if and when it comes here, depending on a test drive and price .... maybe I shouldn't .... a Magna will suit me better I think....maybe a Camry.... Maybe I should stick to my GT... I don't really know what I want ...

sounds good mate... same with me, i dont really want to wreck the car, its too nice to destroy with huge mods.. ill prob complete the exhaust and a few little things here and there like cam gears and maybe PFC but thats it... nothing major it goes hard and drives smooth.

  • 3 years later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...