Jump to content
SAU Community

Recommended Posts

heys, i've done a search but wouldn't find anything..

basically i've noticed a few of you have bought cars from over east. would like to know how you did it.

ie did you fly over to have a look?, how was the car shipped over, wat company and how much.

feel free to pm any bad points too :rofl:

am finking of buying a car from the east and would like to know ur experiences.

cheers

johan

Link to comment
https://www.sau.com.au/forums/topic/189436-bringing-a-car-over-from-the-east/
Share on other sites

Hey mate,

As Gazza pointed out, it has been covered previously. Did a quick search and found this thread...

http://www.skylinesaustralia.com/forums/t177361.html

Hope that gives you some info.

Cheers

Brad

Well you have posted the question now.

Too things.

1. Good idea, you will save heaps on purchase price and there is heaps of variety. The savings on Stamp Duty alone paid for 2 way airfair. You must have the seller agree to let you use there address to register the car in your name (but at there address) in order to pay Eastern S/duty rate. (on 50k, there is approx $1500 difference from melb 2 perth)

2.Transport cost $750ish with Toll/TNT. dont believe them when they say you will get your car in 5 days.....generally 2-3 weeks by inclosed train carriage.

Sight the vehicle yourself.....dont fall for letting the seller get an M.O.T. inspection. The MOT insp doesnt seem to pick up on much......i.e. accident damage.

hope that helps.

hey mate i lined up a car that i thought was sweet, the seller agreed to a deposit, i flew over to melbourne bought the car drove it to adelaide(why not) put it on a truck flew home about 1.5 weeks later the car was sitting on my drive way best idea ever, got a little holiday travel time and a better car.

i got r32 pretty modded like fmic, exedy race clutch and other random shiz for $9000

flights there and back $500

petrol food shelter ect ~$300

truck home $850

total ~$10700

for a car that i could sell tomoro for 13

truck company are fully insured think they are "moving cars" they work through TNT

I recently bought one from Sydney. Transport company was moving cars, who most people have said use TNT/Ceva Logistics. Paid $1200 for pickup from the guys house in Syd then delivered to the depot here in Perth. Can't fault their service and it was delivered within about 8 days, pretty quick!

Didn't fly over to check it out, but if you've got time I'd recommend lining up a few cars that you are really keen on and going over there yourself and taking a look. Might want to try to get the stock parts with the car (if it's modded) so you have the option of fitting them to take it over the pits.

Edited by brynj

When i imported from jap, i got my compliance done in sydney. One of my mates told me that some cars that get trained over sometimes get a little damage due to the lil abo's on the nullarbor which through stones at the cars when the trains go past. (trying not to be races!) So i got mine shipped with seaway logistics which also cost around $700-$750 and roughly takes 2weeks, choice is yours really!!

hey mate i lined up a car that i thought was sweet, the seller agreed to a deposit, i flew over to melbourne bought the car drove it to adelaide(why not) put it on a truck flew home about 1.5 weeks later the car was sitting on my drive way best idea ever, got a little holiday travel time and a better car.

i got r32 pretty modded like fmic, exedy race clutch and other random shiz for $9000

flights there and back $500

petrol food shelter ect ~$300

truck home $850

total ~$10700

for a car that i could sell tomoro for 13

truck company are fully insured think they are "moving cars" they work through TNT

Totally agree, i bought a car in melb from a company that has regular 1st/2nd page ads in HPI & lots of wank about quality & backup ect & ended up paying too much for a car that didnt have half the stuff i payed for on it & was told u got a good deal, so stiff shit! If i flew over & looked at the car myself i never would of bought it...

So many good cheap cars over there if you went for a few days u could find one no worries :turned:

hey dude i just got my 32 from qld,cost me $1900 to get it here in a sea container with civa tnt,,didnt bother to fly and check it out i just took the guys word the car was sweet,and oh it was,very happy,the only damage was a very slight scrap on the front bar from getting it in the container,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...