Jump to content
SAU Community

Gibson Gt-r

gtrtech

By gtrtech,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted
G'day :/

Hoping someone can help me with some information (pics would be great as well if available).

Does anyone know what type of engine fan/s the Gibson Motorsport Winfield R32 ran? Was it the normal viscous type, or was it swapped out for thermo's?

I also need to know about the brakes, I know at this point they weren't cross drilled, but were they slotted?

I would love any pics of the brakes and suspension (especially with a wheel removed, and also looking in the engine bay forward (to see the fans).

Thanks in advance for any assistance.

No fans that I ever saw.

AP 6 spot callipers front and 4 spot rear.

Different style and thickness AP rotors were used. I am sure I saw crossed drilled rotors at sprint events, from memory the endurance rotors were always slotted. As well as thicker rotors for the endurance events, they also ran thicker pads for longer wear.

For suspension and engine bay pictures follow my link on page 1 of this thread.

Cheers

Gary

  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

  • 1 month later...
  • 1 year later...
PZR Rookie

PZR

Posted
Posted
The Ricoh GTS-R is apparently undergoing restoration in Japan also.

Apologies for reviving this thread with a long-shot 'Wanted' request.......

The RICOH-sponsored works Gr.A GTS-R is currently undergoing restoration in Japan, and I'm searching for an 80mm VDO boost gauge ( 2 Bar reading ) for it.

If anyone had any leads, I'd be very pleased to hear from them. Cheers!

Here's a pic for your trouble. This was what was revealed under the 'Stock Car' series overfenders that the car was wearing when acquired:

ricohgrarearquarter11.jpg

Jetwreck Grand Master

Jetwreck

Posted
Posted
Apologies for reviving this thread with a long-shot 'Wanted' request.......

The RICOH-sponsored works Gr.A GTS-R is currently undergoing restoration in Japan, and I'm searching for an 80mm VDO boost gauge ( 2 Bar reading ) for it.

If anyone had any leads, I'd be very pleased to hear from them. Cheers!

Here's a pic for your trouble. This was what was revealed under the 'Stock Car' series overfenders that the car was wearing when acquired:

ricohgrarearquarter11.jpg

Awesome.....is it coming to OZ? If I find one can I get more pics? :bunny: ...I gather you the era gauge? I can ask around for you....will let you know tomorrow...unless someone finds one for you in the meantime.

PZR Rookie

PZR

Posted
Posted
Awesome.....is it coming to OZ? If I find one can I get more pics? :bunny: ...I gather you the era gauge? I can ask around for you....will let you know tomorrow...unless someone finds one for you in the meantime.

I'm afraid it's not coming to OZ ( unless you pay for it to visit! ) as it's going to stay in enthusiastic Japanese hands. It will be a while before it's finished anyway.

The VDO boost gauge seems to be quite difficult to find in this size. 52mm versions seem to be no problem, but I've struggled to locate the bigger version. I have an old NISMO number for it from the NISMO Gr.A kit list for the HR31 ( 24870 RR570 ) but even in Japan it's difficult to find them. I don't even know the corresponding VDO part number.........

Thanks for the offer of help. Here are some more pics that might be of interest. Some of you may have seen a few of them before elsewhere:

post-14199-1244121023_thumb.jpg

post-14199-1244121075_thumb.jpg

post-14199-1244121102_thumb.jpg

post-14199-1244121144_thumb.jpg

post-14199-1244121170_thumb.jpg

PZR Rookie

PZR

Posted
Posted

Yes, it passed from NISMO to ENDLESS's ownership after NISMO had stopped using it. At some point after that ( my guess around 1990 ) it started getting more and more modified, and ended up racing in the 'Grand National Stock Car' series with the cut out rear arches and box-type overfenders. Its final active race season was in 1998, in the ENDLESS blue paintjob with CASHIEW as the partner sponsor.

It got cut about a little bit in its ex-Works life, but most of it is still there and saveable. The guy restoring it knows what he's doing, as he's an ex-NISMO race mechanic.

The original type VDO boost gauge is one of those parts that seem like they should be easy to find, but turn out to be quite elusive.....

PZR Rookie

PZR

Posted
Posted
What is that nice looking engine out of, the one on the stand in front of the "endless" photo?

It's a Nissan VRH35 ( 3496cc V8 DOHC twin turbo ) as fitted to the Nissan R89C Group C sports cars. This particular one was cut up and used as a 'display' engine after its race career ended.

post-14199-1244190649_thumb.jpg

Jetwreck Grand Master

Jetwreck

Posted
Posted
I'm afraid it's not coming to OZ ( unless you pay for it to visit! ) as it's going to stay in enthusiastic Japanese hands. It will be a while before it's finished anyway.

The VDO boost gauge seems to be quite difficult to find in this size. 52mm versions seem to be no problem, but I've struggled to locate the bigger version. I have an old NISMO number for it from the NISMO Gr.A kit list for the HR31 ( 24870 RR570 ) but even in Japan it's difficult to find them. I don't even know the corresponding VDO part number.........

Ok....from what I can find out these were no manufactured for the GSM cars, the were modified.... basically you need to get a 52mm boost gauge and a 80mm rev then take it to a gauge maker and get him to exchange the inners over and make a new backing plate and needle.

below is a pic of one of the GMS cars(now Sizzler) cockpits

post-37023-1244192047_thumb.jpg

PZR Rookie

PZR

Posted
Posted
Ok....from what I can find out these were no manufactured for the GSM cars, the were modified.... basically you need to get a 52mm boost gauge and a 80mm rev then take it to a gauge maker and get him to exchange the inners over and make a new backing plate and needle.

below is a pic of one of the GMS cars(now Sizzler) cockpits

Jetwreck,

Thanks for looking into this. Much appreciated.

The original in the RICOH car was actually a type manufactured by VDO and sold by NISMO ( hence the NISMO 'RR' number in the kit list ) so it wasn't strictly a 'one-off' or a custom build just for the NISMO built cars.

It was just a very plain black faced design with white numerals and a red needle, and I believe it had a hand-settable second needle too. I had a picture of the exact thing somewhere but I'm damned if I can find it now......

I'll just have to keep looking. Cheers.

Alan T.

N1GTR Grand Master

N1GTR

Posted
Posted
It's a Nissan VRH35 ( 3496cc V8 DOHC twin turbo ) as fitted to the Nissan R89C Group C sports cars. This particular one was cut up and used as a 'display' engine after its race career ended.

post-14199-1244190649_thumb.jpg

Nice motor. Any more details on it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...