Jump to content
SAU Community

Recommended Posts

Hi,

1. Was reading on posts on the forums and some say that they 'boost' there car, whats does this mean?

2. How much was the R34 GT-T original price when it first came out (stock of course)?

3. For a stock R34 GT-T, what car is it compared to performance wise?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/189557-simple-questions/
Share on other sites

1. Boost refers to the forcing of air into the engine by means of a turbo... damn that definition sounded good :D Basically boost is the pressure at which the turbo is forcing air into the engine. When people say that they boost their car, it means that they are driving it within the boost range. Driving off boost means the turbo is not spooling and the engine is getting air at atmospheric pressure as apposed to boost pressure.

2. R34 GTT's were never sold in Australia, so if thats the price you're looking for, its not possible. If it was, I'd say it would go for a bit more than the current V35. The only reason I say more is cause of the lack of turbo in the V35. So say $60-70k. Some one can probably estimate better than me.

3. Performance is a very broad term. Supras would probably be similar overall, but you need to be more specific. You could mean track performance, street performace etc etc

Hope this answers your questions

I seem to recall reading an issue of Unique Cars back in 2000 or 2001 that had a then-2 year old GT-t in it for private sale. It was yellow, manual with the Nismo Aero Kit and a sunroof and something like 5,000km on the clock, and the asking price was something like $80k.

Interesting considering back then R34 GT-R's were fetching almost $200,000 (from memory, I might be wrong).

Edited by Bluprint

I have price lists for alot of models going back quite a few year, in japan from the dealers. ie no on road costs. Import duty, taxes and fees plus the importer profit = con.

The v spec gtr in 2000 was 6,000,000 yen, the exchange rate was rat sh@t. point is considering cost of living wise 100 yen = 1 dollar, our car prices are very poor. government import duties and taxes protect high production cost in local manufacturing so we pay too much for cars to keep people working for holden in a job.

sorry off topic

Edited by momo

good answer!!

:laughing-smiley-014:

1. Boost refers to the forcing of air into the engine by means of a turbo... damn that definition sounded good >_< Basically boost is the pressure at which the turbo is forcing air into the engine. When people say that they boost their car, it means that they are driving it within the boost range. Driving off boost means the turbo is not spooling and the engine is getting air at atmospheric pressure as apposed to boost pressure.

2. R34 GTT's were never sold in Australia, so if thats the price you're looking for, its not possible. If it was, I'd say it would go for a bit more than the current V35. The only reason I say more is cause of the lack of turbo in the V35. So say $60-70k. Some one can probably estimate better than me.

3. Performance is a very broad term. Supras would probably be similar overall, but you need to be more specific. You could mean track performance, street performace etc etc

Hope this answers your questions

Thanks for the replies guys.

So just regarding the boost answer, everytime you accelerate you would be utilising the turbo?

hmm...only AU$34,000 brand new... its either the R34 keeps there value or Japan gets them really cheap. I thought it would be around the $40K mark.

As for the performance quastion, i just want to know what it is compared to on paper (i.e. just looking at the specs what is it compared to without driving it).

Cheers

Thanks for the replies guys.

So just regarding the boost answer, everytime you accelerate you would be utilising the turbo?

Someone beat me down if I'm wrong but, turbos usually kick in at certain rpm's. It can be changed when it comes into spooling up by adjusting the actuator (I think) ??? Something along those lines. So basically, if you put your foot to the metal to the other metal it's going to take off. In general though they don't usually kick in much until you get into high revs.

3. For a stock R34 GT-T, what car is it compared to performance wise?

Cheers

It was supposed to compete with BMW M3 of the same era (E36) in Japan. Both has RWD front Inline six engine layout with similar power to weight ratio. Obviously they are plenty other competitors you could name, Supra, RX-7....

It was supposed to compete with BMW M3 of the same era (E36) in Japan. Both has RWD front Inline six engine layout with similar power to weight ratio. Obviously they are plenty other competitors you could name, Supra, RX-7....

Except around a track the RX7 would own all those cars... Having beaten the GTR on a number of occasions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah. OK. I take it back. I hadn't looked closely at the R33/4 arms and presumed that GKTech did as GKTech do everywhere else, which is to use sphericals there. The poly bushings are made to be 100% interchangeable, should use the standard bolt just fine. Every other bush in every other place in pretty much every other car, does.
    • @silviaz Ok cool, so much easier with a video. I can see why this video would be confusing for new players.   It is obvious that this entire bonnet is going to be resprayed, have a look in the background around 2:05, you can see a bunch of bare metal on the left side of the bonnet.  It's not an issue for the primer being laid down on the non-prepped clear on the bonnet. It will be sanded off at a later stage.  This might not be obvious to new players, but working on bare metal and factory paint in this instance, the factory paint is like a mountain and the bare metal is a huge valley. The bonnet needs to be levelled flat before it receives it's final stage of colour and clear coat. During this levelling process, the primer that is landing on the clear that you are worried about will be removed.  Also, this guy is out of control. Zero PPE while spraying, maybe he is a good example overall about what not to do lol.
    • Ok I FINALLY found a video lol. This took way longer than it should have as I could have sworn I saw multiple videos like this. I kept finding the completely opposite (the correct way of doing this). I wouldn't be surprised if I f**ked this up somehow.  I just realised where I've been getting confused and even with other things I work on. I haven't been doing things the regular way instead I'm going a roundabout way of doing things, like putting epoxy primer first then filler for example instead of putting just filler then primer on top of that, then wondering what happens if I get that primer on the clear coat that I haven't sanded yet. This was a bit of an epiphany 馃槀  But anyways, here this video. Time stamp, 2:56, some of the primer lands on the paint unscuffed above. You can see from the reflection it looks shiny.  
    • It does, this part circled in red. I assume the OEM bolt might not work well with the poly bushing because the dimensions may be different?
    • The J arm doesn't have bushes either. Assuming that by "J arm" you mean the part of the upright that runs down from the upper arm's outer bushes to the top of the hub. That has a kingpin style bearing in it. If you meant the lower control arm, it has 1 bush, at its inner end. If you have PU in there, that is superior to Nismo rubber. If you meant the caster/tension rod - it has 1x bush at the front end, and again PU is superior to Nismo rubber. But as I said above, I would definitely get the GKTech arms for that, as sphericals slay all other options there.
  • Create New...