Jump to content
SAU Community

Is A R32 Gtst 2 Door Restricted For P Platers Pre July 2007?

jakez88

By jakez88,
in Victoria

 Share

Recommended Posts

jakez88 Veteran

jakez88

Posted
Posted

Alright i'm pretty sure someone might have gone through it before but i need to know for myself. I'm 19 and a p plater that got my p's (VIC) before july 2007 and want to get a 32 gtst coupe but people have been telling me that its over power to weight.

I've called up vic roads but they didn't know anything about the 32 and i also emailed them to see what they would say but they sent me back a automated reply telling me about power to weight ratios and how to calculate them god damnit.

So i need to know if someone has been told first hand by the authorites or something that this car is illegal to drive on p's because of power to weight. I'd like to hear from the VIC p plate r32 owners also to share their experiences with driving one.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Hi there

I notice you are new-ish to the forum.

Please see here:

http://www.skylinesaustralia.com/forums/se....html&f=100

That is the search form. There are 100's of topics about Power to Weight restrictions.

For instance this thread just last week:

http://www.skylinesaustralia.com/forums/t187966.html

Cheers

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...