Jump to content
SAU Community

Recommended Posts

300rwkw in a gts-t would pull away from a gtr pretty easily.. maybe not up to 100 but from a rolling start no probs (e.g. 2nd and up)

Cheers for that mate. the plan is to make it a relialble 300rwkw weapon!!!

hehe, thats it :D

20k adventure is 300rwkw (reliably) :D

And no, it wont catch a GTR if is standing/low speed start. Not a chance.

money is not a problem mate, but it will still be a weapon hey

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I was thinkin low to mid 11's too, could a GT 3040 push me down the quater with 300rwkw??

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cant remember the mph, think it was in the 120s though, Look I know this guy through a mate and we went to the runs together a few times. I am only stating what times he did and what power he said it made as an indication to the author of this thread, if it is a shit time for that power level then maybe it doesnt make that much power, I dont know??? But I think that thats pretty awesome for a backyard build on a gtst.

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I think your being abit optimistic, again remember these are street cars with average drivers, maybe if it was a fully set up drag car, with all suspension and proper tyres and gutted interior this might be achieved. He was running slicks but no doubt they were the cheapest second hand set he could get his hands on. I should also add that the 11.8 pass was with massive wheelspin off the line. ANyway its an indication, I think if you are building a car you should look at the worst it should do and if you do better you will be happy, If the author of this thread goes to the track aiming for a high 11s pass and gets a low 11 he will be happy. If he goes aiming for a 10 and has a few bad runs and cant better a 12 then he will have the shits.there is too many vairables to say what it will run but I believe that on a street car that is used everyday an 11s pass is awesome. Thats my 2c

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Snaped clean sh it hey, cheers for that mate let us know if it does crack...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...