Jump to content
SAU Community

1/4 Mile 300wrkw R33 Gts-t

Cliffo_rb26dett
 Share

Recommended Posts

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
300rwkw in a gts-t would pull away from a gtr pretty easily.. maybe not up to 100 but from a rolling start no probs (e.g. 2nd and up)

Cheers for that mate. the plan is to make it a relialble 300rwkw weapon!!!

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
hehe, thats it :D

20k adventure is 300rwkw (reliably) :D

And no, it wont catch a GTR if is standing/low speed start. Not a chance.

money is not a problem mate, but it will still be a weapon hey

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

2rismo Grand Master

2rismo

Posted
Posted
It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I was thinkin low to mid 11's too, could a GT 3040 push me down the quater with 300rwkw??

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cant remember the mph, think it was in the 120s though, Look I know this guy through a mate and we went to the runs together a few times. I am only stating what times he did and what power he said it made as an indication to the author of this thread, if it is a shit time for that power level then maybe it doesnt make that much power, I dont know??? But I think that thats pretty awesome for a backyard build on a gtst.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I think your being abit optimistic, again remember these are street cars with average drivers, maybe if it was a fully set up drag car, with all suspension and proper tyres and gutted interior this might be achieved. He was running slicks but no doubt they were the cheapest second hand set he could get his hands on. I should also add that the 11.8 pass was with massive wheelspin off the line. ANyway its an indication, I think if you are building a car you should look at the worst it should do and if you do better you will be happy, If the author of this thread goes to the track aiming for a high 11s pass and gets a low 11 he will be happy. If he goes aiming for a 10 and has a few bad runs and cant better a 12 then he will have the shits.there is too many vairables to say what it will run but I believe that on a street car that is used everyday an 11s pass is awesome. Thats my 2c

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Snaped clean sh it hey, cheers for that mate let us know if it does crack...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      J50 clock date suddenly reset to January 1

      By MBS206 · Posted

      With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • The Bogan
      Jacks that fit under GTR lips that can reach the subframe?

      By The Bogan · Posted

      Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...