Jump to content
SAU Community

Chrome rim repairs

MacK

By MacK,
in General Automotive Discussion

 Share

Recommended Posts

SLY33 Mentor

SLY33

Posted
Posted

sorry dude, ive just purchased a set of big chromies, and before i bought them, the wheel guy warned "IF YOU DAMAGE THEM, YOU HAVE TO BUY ANOTHER WHEEL OR LIVE WITH THE DAMAGE, AS NO BODY IS ALLOWED TO CHROME WHEELS IN AUSTRALIA!" i have no idea why, he said something to do with pollution??@! wtf...??

ie if you damage a lip, you cant fix just that area of damage, you have to get the whole wheel chromed again, which noone does, apparently. I dont see why you couldnt just go to a place that does chroming- surely if you pay them enough.... :)

MacK Rising Star

MacK

Posted
  • Author
Posted

SLY i got the same response from EVERY SINGLE rim repairer!!! They all said they cant do anything about it and ill just have to live with it or chuck my rims out!!! considering i have VEILSIDE rims i was like F OFF!!!!!!!!! i refused to believe that they couldnt repair a hunk of F'in METAL!!

anyway i took it to a certain rim repairer and they said they will be able to fix it! so fingers crossed we'll see what happens! If the job is good, ill let everyone know who they are!

Anyway if anyone out there knows of any repairers that can do chrome PLEASE post here, or PM me with their details!

predator Grand Master

predator

Posted
Posted

You should be able to get the rim repaired normally, and then have it chromed later by any place that specialises in that area. I think they're playing excuses because they don't generally work with them.

Otherwise speak to a place that does specific chrome repairs - there are some around.. Even one that does things like repairs and restorations on chrome bumpers and things for older classics should be able to apply the same techniques to wheels, even if they don't specifically advertise it.

Actually, I just had a look..go to www.yellowpages.com.au and type in "electroplating". There were about 63 it came up with in Sydney. Even if they can't do your wheels specifically - they'll be able to give you advice and pointers to a place that can.

Post how you go, as I am sure many others could be interested. Even though my rims (chrome too) aren't damaged, if they ever were i'd be interested to see how they could be repaired.

Joe Community Regular

Joe

Posted
Posted

the reason why most people dont do it is because the chrome has to be stripped off to find out what type of metal the rim is, which is a pain itself.

Once its repaired its got to be re-chomed which i think wont look the same. Which is the reason why MOST tyre/wheel place dont touch it.

Thats what ive been told by a metal expert.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • MBS206
      NC MX5

      By MBS206 · Posted

      I assume clearances were all a-okay?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...