Jump to content
SAU Community

NA to RB26DETT ??

NA_R33

By NA_R33,
in Engines & Forced Induction

 Share

Recommended Posts

NA_R33 Grand Master

NA_R33

Posted
Posted

Hi all,

Im planing to do this conversion around the middle of next year. But if funds permit i may do it a little earlier. Ill use the GTR rear dif and try get GTR brakes all round. My quetion is what box do u guys recomend as im not doing the AWD conversion i cant use the 6 speed box unfortunately :D How strong is the GTST box? as i want to do everything right the first time so when i have a bit more money down the track i can go for bigger power with fewer issues. Has neone done this conversion or have ne advice to give me it would be greatly appriciated.

Cheers

John

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/
Share on other sites
NA_R33 Grand Master

NA_R33

Posted
  • Author
Posted

haha yeah thats cool, i was always under the impression they were 6 speed?? oh well im not missing out on nething then, also a gtr half cut is around 6g's ive been told as a real approximate around 10g's give or take a few. but i will also need new wheels aswell, so im giving myself a 15g limit for when i do it so i should be able to do a few mods straight away aswell. from my current insurace policy they only quoted 160 bucks extra for the conversion, and im 17 rating 5!!! i made the mistake of not getting it in writing cause im sure id never get a quote like that again it must have been a mistake.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-401751
Share on other sites
NA_R33 Grand Master

NA_R33

Posted
  • Author
Posted

i saved since i was like 10, working at my grandfathers company, then when i was old enough i worked at maccas aswell, i started saving for a car before i even knew what a skyline was, i managed to put together 10g's and my parents gave me another 6. and by the middle of last year i was a very proud owner of a skyline, since then every dollar i have earnt has gone into my car. And after y12 im planning to take out a 15g loan and do the converion.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-401828
Share on other sites
Greg Veteran

Greg

Posted
Posted

this might be a stupid question but why are you getting the extractors if you're doing the conversion next year? i hope you go ahead with the conversion, it would be good to see it done and that way i'll know exactly what needs upgrading so I can do it to my car once i finish uni :D

what age do you get your license in queensland? i get mine in less than 3 weeks!!

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-402044
Share on other sites
NA_R33 Grand Master

NA_R33

Posted
  • Author
Posted

u get ur learners when ur 16 and 6 months and have that for 6 months then u get ur p's then stay on them for 4 years. Yeah i figured the extractors wearnt too pricey and i just wanted i little bit more performance from my car for now, the high flow insert also isnt too pricey and an apexi afc i can use with the new engine.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-402060
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...