Jump to content
SAU Community

Recommended Posts

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/
Share on other sites

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

gone is the true GTR ??

show me a stock 34 do 0 - 100 in 3.6 secs lol, or even do a 7.38 at the Nurburgring for that matter, This wll never take the place of GTRs gone in my mind, but i wont discount it as a true GTR either, its HOT and flippen powerfull

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437149
Share on other sites

This wll never take the place of GTRs gone in my mind

why?

does it need to be 20 seconds slower around the 'ring, have a weaksauce oil supply system, and be cursed with 5/8ths of f**k-all low rpm torque to be 'the real deal' :spank:

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437159
Share on other sites

well it already has a much better lubrication system than the RB-series engines, forged pistons and has titanium conrods/valves standard

the only potential weak links are the block rigidity or (although unlikely) the head gasket design

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437172
Share on other sites

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

:spank:

It looks more like a 350Z, and the last I looked, that's not a Commodore.

Non manual? DSG is even better than manual -- true super-cars of the 21st century have all gone this way so why shouldn't Nissan?

No "etesa"? It has ATTESA E-TS all wheel drive.

It has 353kw and 588nm torque from a VR38DETT (3.8 litre twin turbo DOHC V6) engine; in my opinion, this will not only be "true" to the GT-R image, but will enhance it. Its going to be roughly half the price of a Porsche for the same performance around a track, to me that sounds exactly like what the next GT-R is and should be all about.

Edited by M34N
Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437173
Share on other sites

However much of a ball tearer this is, and however much I want it, i'll still always have a special place in my heart for the 'old skool' Japanese cars even if a lot of them had inherent faults from the factory :spank:

Edited by Yawn
Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437180
Share on other sites

actually if you think about it, every single GTR in Nissan's history has been a straight 6... the S20 in the C10 and C110, and the RB26 in the R32, R33 and R34.

I still say that the new GT-R is more Z than Skyline, just whoring on the heritage of the Skyline brand and icons.

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437197
Share on other sites

However much of a ball tearer this is, and however much I want it, i'll still always have a special place in my heart for the 'old skool' Japanese cars even if a lot of them had inherent faults from the factory biggrin.gif

same

but the world moves on- not many people here would think all that highly of the V8 type that just have to have a big Holley 850 carb and kettering distributor ignition system on their 351c.i pushrod valve bounce machine

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437200
Share on other sites

actually if you think about it, every single GTR in Nissan's history has been a straight 6... the S20 in the C10 and C110, and the RB26 in the R32, R33 and R34.

I still say that the new GT-R is more Z than Skyline, just whoring on the heritage of the Skyline brand and icons.

now there are only 2 manufacturers in the world making full-production I6 passenger cars: BMW and Ford

everyone else seems to have realized that you get better handling balance without 2 or 3 cylinders hanging forward of the front axle line

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437207
Share on other sites

now there are only 2 manufacturers in the world making full-production I6 passenger cars: BMW and Ford

actually BMW just ditched the I6 for a V8 in the 3 series last month.

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437220
Share on other sites

to the thread starter... have you read ANY of the threads in this section?? some of this shit has been confirmed for ages, thanks to people like justin (7tune.com)

and i read the whole article in wheels. 1) wheels=useless, 95% front cover holden, mag 2) they have on their front cover the INCORRECT power figure, nice work :spank: 3) In the contents pages, they call it a friggen Skyline GTR.

wheels=useless

the thing has OFFICIALLY been released, with full specs on the website and the god damn CEO himself giving the power figure, and they still get it wrong

idiots

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437292
Share on other sites

i agree with the comments about it looking more like a 350Z. It's the front headlights. The skylines, Z's, and now GTR share VERY similar front end styling. That was the thing i hated the most about the 350Z when it first came out, but nissan seem to love that headlight design ;\

i agree with the above comment. it needs a squarer front end ;D

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3438608
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...