Jump to content
SAU Community

Recommended Posts

***** THE MOST CONFUSING DAY IN CAMBELLTOWN IS FATHERS DAY*****

HAHAHAHAHAHAAH ROFLMAO X INFINITY!

:D most people are nice in that area -2 lol hahahahahah I have to stop. I'm gong to get into trouble again LOL :laughing-smiley-014:

i lived in the liverpool area for 25 yrs...Cambelltown is a bit of a lottery, reaaly good in some places...total shithole in others....find out from locals where to be and not to be before making that move....but i would be moving a little closer toward sydney as Cambelltown is a bit of a travel..

Seriously cambelltown is ok just so far away from the city and life and fun and i think there is something wrong with the water too people are different there. LOL ..........OK 'll stop

Q: What does a girl from Campbelltown use for protection during sex?

A: A bus shelter

C-town isn't bad. You get bad apples in almost every area. Just chose what part of the C-town area wisely

ok thanks all you guys for the mixed info i am looking to rent at first so will search the area i did pick campbell town as i thought it was central to most places i dont want to live up market as me(age 39) and the wife (age 40)are not that way we are down to earth people love going for a good run out in the car going down the pub havin a few friend over for a barby we've never been on the dole just honest hard working people in need of a good social life at the end of the week.

so where to research

I live in Narellan, haven't had any trouble with cars getting stolen or house broken into, haven't heard of any either. Lived here since i was a boy. Narellan is 5min south west of C'town. As people have said you get your bad spots and good spots, just don't go near Airds or Claymore!!!

ok thanks all you guys for the mixed info i am looking to rent at first so will search the area i did pick campbell town as i thought it was central to most places i dont want to live up market as me(age 39) and the wife (age 40)are not that way we are down to earth people love going for a good run out in the car going down the pub havin a few friend over for a barby we've never been on the dole just honest hard working people in need of a good social life at the end of the week.

so where to research

I moved to Leumeah from Liverpool (UK) i have been back a few times and i can honestly say i would pick Leumeah over Liverpool anyday.

Ok it seems as if the "cons" are well taken care of,

so now for the "pros".

Cost of living is quite acceptable.

There are no telegraph poles, all major electrical systems are underground.

Streets are wide and surfaces in very good condition.

Cost of a modest 3 bedroom house is under $400K.

Getting to and from the surrounding suburbs is quick and simple.

Travel time to Sydney is about 30 minutes on the M5, off peak.

Getting to the Hills districts is 20 minutes on the M7.

Council rates are cheap and the sanitation services are efficient.

Demographics are varied, with plenty of self employed businesses.

The ratio of good sorts is very high, must be something in the water.

No airport traffic.

Less polution, council has a policy about retainment of trees.

WSID and EC are close via the M7, as to is Wakefield park (well relatively speaking).

Et cetera, et cetera. :)

I live in Narellan, haven't had any trouble with cars getting stolen or house broken into, haven't heard of any either. Lived here since i was a boy. Narellan is 5min south west of C'town. As people have said you get your bad spots and good spots, just don't go near Airds or Claymore!!!

Airds? LOL!!!!!

I did some research on that a while ago, 2/3 bedroom townhouse in Airds for 75k. You seriously get what you pay for in Airds :)

Btw im not having a go at anyone, but yeah, Airds wouldnt be your first choice of location

thanks again guys your info is great, i'm a maintenance electrician by trade so will i be looking for work in sydney or is there industry all over nsw this might have an influence in the area i choose to live

actually i can get you a job. i work in an engineering department of a large hotel group, and we are hiring if you have general experience with plumbing/carpentry as well or are eager to learn. we will train you in these areas anyway, its just quicker if you already know SOMETHEING :dry:

pm if interested

If you are going to be renting initially, then i'd suggest the inner west. Unless rents have gone up significantly in the last couple of years it was the about the best cross between affordability/proximity to the city i found when i was younger. I found public transport to be really good in that area too, as you are at a bit of a fork in the road as far as trains go with 3 different lines running through the area so you are generally fairly close. Buses run everywhere. My last place had a bus stop out the front which went to newtown and glebe, and a train station 400m up the road if i wanted to go to the city. Cab ride was about 25 bucks to get me home at 2am :thanks: You are also generally travelling against the traffic in the morning which makes a huge difference.

But if you have friends over here then it's worth being at least reasonably close to them initially. Nothing worse than living close to the city but travelling out to the west every second weekend to go to the pub with your mates, but you can't drink because you have to drive home....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...