Jump to content
SAU Community

Recommended Posts

hi guys and girls. i'm looking at getting a r33 gtst from aa family motors at gepps cross. its the burgundy/wine colour and has a aftermarket front bumper, front mount intercooler, stronger clutch, full exhaust, bov, pod and 18" 5 spoke wheels. does anyone know the car im talking about? and anything about its history and all that? any help/info would be hugely helpful and appreciated.

thanks.

Edited by simonr
Link to comment
https://www.sau.com.au/forums/topic/191622-anyone-know-this-car/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

lol as if u buy it from car yard.

So thats like saying buying a car from Synegy is pointless???? They are a car yard aren't they?? and don't say because they are a jap import specialist they are ok!!

Maybe if someone knows of the car and it's history then they can post up, instead of saying car yards are shite!!

The guys just joined up with SAU yesterday..... Give him a break! If you want to go flame someone here is the place to do it....... http://www.nissansilvia.com

Edited by Deluxe

its 15999 11/95 build 140000kms interior is very good and exterior is great except for th mirrors have faded. has front mount, exhaust, pod(exposed of course) claimed 200rwkw 18"

drives really nice and runs smooth and consistent. susp/steering seems good and tight, engine has no apparent noises when listening under the bonnet and it seems either well tuned or the stock ecu is ok still, if the power figure is true. it would have 3months warranty which i wouldnt get private and i plan on usin ever bit of it i can.

i wonder if i got it dyno'd and it only made 170kw or whatever if i could ge them to mod it so it is what i bougt! lol. the ad does specify the power output after all.

Edited by simonr

Doesn't sound too bad mate, I wouldn't be looking for much more than that for mine if it were for sale and thats a S2 1996 with the same amount of Kms but has another 20 more Kws! Sounds alright tho, if your unsure of it then maybe ask for less and maybe 6 months warranty, If they won't have that then ask them whats wrong with the car.....lol

Edited by Deluxe

Does it have a 400R front and GTR rear wing? If so, be wary!! Redgtst crashed his 33 a few months back and it was an economical write off. May be repaired, so have it inspected whatever you do. if they refuse to allow an inspection, DONT BUY IT!

yeah be careful buying from a car yard, i rushed into mine and it has cost me lots since (its still stock after 3 years as i have spent more money fixing it than i have moding it :D )

if you do buy it from a card yard DON'T BUY AN EXTENDED WARRANTY!!!!! if the car has any modifications its void as soon as you drive it out the yard.

Does it have a 400R front and GTR rear wing? If so, be wary!! Redgtst crashed his 33 a few months back and it was an economical write off. May be repaired, so have it inspected whatever you do. if they refuse to allow an inspection, DONT BUY IT!

If an insurance company declare it a write off (economical or otherwise) it can not be registered again in Australia.(the costs make it prohibitive with engineering inspections etc for regency - and it MUST have a FULL regency inspection)

I found this out when I was looking at buying back my car after front end damage. (I would be able to fix it but never register it again) My only alternative was to take it to another repairer who was able to fit some "Reconditioned" parts rather than new from Nissan parts.

guy did you end up with a new car? haven't seen ya around for a while now

My car is nearly finished - I found a repairer that could fix it within the Insurance companies limits.

All I need now is to find a nice front bar (I like the TRUST bars - but finding a good one seems impossible)

i bought my car from a car yard and have been very happy, and i didnt even test drive just heard it run

i think if your gut feeling is telling you its ok then it very well might be

have you tried googling the car yards name because if a yard is shonky people will be talking about it online

defiantly don't pay 800-900bux for that 3 year warranty crap

If an insurance company declare it a write off (economical or otherwise) it can not be registered again in Australia.(the costs make it prohibitive with engineering inspections etc for regency - and it MUST have a FULL regency inspection)

I found this out when I was looking at buying back my car after front end damage. (I would be able to fix it but never register it again) My only alternative was to take it to another repairer who was able to fit some "Reconditioned" parts rather than new from Nissan parts.

Well there you go. I was of the understanding that economical write off's were ok to re-register based on the fact that there may not be structural problems, just from an economical viewpoint it wasn't worth their time. Have the laws on this changed in the last few years, or has this always been the case?

Either way, glad you cleared that up for me :)

it has a front bar, dont know what type, looks like sinista's just without the foglights. standard gts-t high rear wing. series 1.5 i believe. i work in insurance and yeah u cant reregister any form of writeoff legally. car yards have legal obligations to guarantee against there being money owing, writeoff rebirths, submerged and stolen vehicles. i'm in the process now of buying it, hopefully it all goes thr, as from talkingtsome mates a work it seems like a good car.

if anyone does know the car ad u can see it on the trading post website at 16999, please let me know. thaks.

for $5k more you can have my 34... :)

As for writeoffs, a friend purchased a WRX from a caryard, later he found out it was an economic wrieoff in NSW, they fixed it, shipped it over here and rego'd it...... It can happen, not sure on the legal grounds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...