Jump to content
SAU Community

For Everyone Who Has Got A Vehicle Inspection At Vicroads When Registering An Unregistered Car!

ashley12345

By ashley12345,
in Victoria

 Share

Recommended Posts

ashley12345 Apprentice

ashley12345

Posted
Posted

Hi Guys,

I'm going to have to go to Vicroads soon to register my car.... currently its unregistered (r32 GTR).

Now Ive heard Vicroads also inspects the car, even though you need to provide a RWC.

How thorough are the inspections? Because i have a slight bit of rust underneath the car......

Hopefully a RWC shouldnt be a problem (I have friends in the trade) but im slightly concerned about Vicroads....

Anyone have any experiance or thoughts regarding this?

Thanks for your help in advance.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

By "friends in the trade" ill assume you mean your getting a dodgy one.

Simply put, dont. Or you'll put your 'friends' at great risk of loosing thier license and a substancial fine.

VicRoads randomly inspect cars. They dont check every single car over, they simply dont have the time.

Majority are just sight the RWC, sight the Engine/VIN number to make sure they match, and thats it.

BUT - if you get pinned for the random 'full check' you could be in a fair spot of strife.

All depends how bad the rust is, if it deems a car to be unroadworthy and so on anyway.

Surely for your own sake you'd get it repaired? I mean, if you know there is a problem, get it fixed!

Im currently going through the same thing, and hence its taking a while to get it registered as i wanna be 100% perfect. I could easily get a dodgy RWC. But i'd rather do it the right, legal way and then know that my car is indeed safe.

Cheers.

GTAAAH Mentor

GTAAAH

Posted
Posted

I've never actually had one inspected (have rego'd 5 myself), each time i got dropped at vicroads, walked inside and provided the RWC and it was all sweet, they were all roadworthy, but the golf and the vn looked like crap so i wouldn't have wanted anyone going too close. Might just be the greensborough branch though

Rekin Grand Master

Rekin

Posted
Posted

when i went to vicroads, they came outside, checked the vin plate, compliance plate and also checked the tyres, if they matched the same tyres stated on the Consumer Information Notice. Had to go back to compliancer and get the stockies put on for them to pass me.

They also disapproved of my GT-Wing brackets saying they are dangerous if you hit a passenger (im sure by the time the passenger reaches the boot of the car, they will not be worrying about gt-brackets) Removed them in the vic-roads carpark and then cleared the car.

Thats because i ended up with a grumpy old inspector from burwood vicroads, also tried to give me standard issue plates when i paid for slim-lines and wasnt accepting the purchase price asking me for its actual value..

abu Grand Master

abu

Posted
Posted (edited)

My car is going in for inspection on Thursday the 8th of November, first registration in AUS as its a fresh import.

Had the compliance done, got the RWC and had it all done properly (first time ever). Basically I now also have an issue similar to yours. I have 17" rims on my car, which according to VIC Roads is legal, tire profiles etc, but apparently for initial registration of the car you HAVE to have stock wheels on the car as stated on compliance paper.

I have heard some inspectors pass them, some don't, but I can't afford to take the chance as I just don't have the time to stuff around.

My advise is, do the best you can and have it all done properly.

Have the car stock as possible, and basically as it appears on the compliance papers otherwise your just going to cause your self more problems and headaches. They will definitely check to see if the compliance work has been done, and standard things such as VIN, engine numbers, lights, horn etc

They will inspect the car, how thoroughly depends on the inspector that checks it. I wouldn't take the chance as I said.

It's not likely that they will put the car on a hoist, or jack it up but as long as it is fine from outside, and everything is legal then they wont persue it further.

Best of luck!

Edited by abu
SABBAi Grand Master

SABBAi

Posted
Posted

I've passed a few cars through Vic Roads inspections when registering or changed engines. Basically, the guys who are doing the inspection are matching up the cars details with the details of the car. Engine numbers, Vin numbers, etc.

They will ask you where the engine number is on the block unless they know the car type. They will do a quick check for visble RW items, such as tyres, windscreen, lenses of lights etc. They do not go through you car with a fine tooth comb.

{TUBZ} Community Regular

{TUBZ}

Posted
Posted

yeah they are hired to check the vin and engine number. i went though the pits 3 times and didnt have an issue. although the last one was the pulser and it had the dodgyist paint job and the guy look at it funny but let it go as that isnt a rwc issue..but it took me a while to get the rwc. had to change everything back to stock. turbo, exhaust, remove cooler, make it low mount and a heap of shit

ashley12345 Apprentice

ashley12345

Posted
  • Author
Posted

Thanks guys....

sounds like it shouldnt be a problem then. The car has previously been registered in VIC its just the reg has expired.

My main concern was the rust underneath the car. Im guessing it would be very costly to repair.

Im going to need to get a stock R32 GTR airbox as it currently has pod filters.

Anyone know where i can source one of these in the South Eastern Suburbs? and how much is it likely to cost me?

cheers

Ashley

Kozeyekan Proficient

Kozeyekan

Posted
Posted

I had my GTS-4 inspected after importing. The guy was fat and lazy, just popped out, popped the hood and had a look around. There was a little (very slight) bit of rust behind the wheels (apparantly snow-spray)

They generally check the engine for mods (I had tower bars, and they were OK) check that the compliance plate is on the b pillar, and that the engine number is engraved into the engine bay near the shock mounts.

Unless you look dodgy, they generally are too lazy to do much else, apart from sneer and enjoy their 5 minutes of power.

nuR.spec Experienced

nuR.spec

Posted
Posted

i rego cars all the time for both myself and for customers who are too "scared" to take their cars in. neva had an issue yet. dun ova 100. and no dont got to broady

greggers Newbie

greggers

Posted
Posted
I have 17" rims on my car, which according to VIC Roads is legal, tire profiles etc, but apparently for initial registration of the car you HAVE to have stock wheels on the car as stated on compliance paper.

I have heard some inspectors pass them, some don't, but I can't afford to take the chance as I just don't have the time to stuff around.

That is one of the main things they checked on my car.. I doubt they will let a differnet tyre size slip

funkymonkey Grand Master

funkymonkey

Posted
Posted

i've only ever had VICroads do a number check on the car (ie sight VIN's and Engine No's) they disregarded the T88 high mount that was on one of the cars I took to register. If you have your RWC, unless the car's totally suss I doubt you'll have any issues... that said if they pick you up then all they'll do is ask the RWC issuer if the car was in the same state when you got the cert done... which they'll deny. But something like rust is hard to cause in the 30 day period since you get the RWC.

ashley12345 Apprentice

ashley12345

Posted
  • Author
Posted
i've only ever had VICroads do a number check on the car (ie sight VIN's and Engine No's) they disregarded the T88 high mount that was on one of the cars I took to register. If you have your RWC, unless the car's totally suss I doubt you'll have any issues... that said if they pick you up then all they'll do is ask the RWC issuer if the car was in the same state when you got the cert done... which they'll deny. But something like rust is hard to cause in the 30 day period since you get the RWC.

Where abouts are the engine nos on the RB26 anyway? I have no idea where they are.....

cosmokram3r Proficient

cosmokram3r

Posted
Posted
VSI's - Vehicle Standards Information

Yeah i just checked it out and it said that it had to be less then 330mm in diameter and the hub has to be similar, i dont really get it though, does that rule out switching the r32 steering wheel for like a momo steering wheel or something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...