Jump to content
SAU Community

Recommended Posts

Hi, I have a problem with my car overboosting and causing it to knock

here is my set up

GCG HF/BB

555 HKS injectors

Pro spec B2 B/C

FMIC

it was set to 15psi high boost and 10psi low boost on the dyno

on the road high boost climbs to 17.7 psi and low to 12.2psi low

my boost controller on high is set at

gain 15%

set gain at 50

the over boost cause to knock after 6000rpm

any ideas why

cheers

joe

Link to comment
https://www.sau.com.au/forums/topic/192179-overboosting-knocking/
Share on other sites

when my m8s car was on high boost it started knocking at high revs... then at most revs... then at all revs... the knocking getting worse and worse... turned out he had done a big end bearing. probly nothing this major in your car just a thought thats all

running power FC

had a knock reading of 94

on the dyno it showed a nice straight line at 15psi at peak getting 252rwkw

Take it to your tuner and get him to adjust the tune - it's not a matter of adjusting the boost controller, esp considering on a freezing night you'd be likely to get a spike again anyway... rather you should try to ensure the tune is better...

So speak to your tuner :ninja:

Take it to your tuner and get him to adjust the tune - it's not a matter of adjusting the boost controller, esp considering on a freezing night you'd be likely to get a spike again anyway... rather you should try to ensure the tune is better...

So speak to your tuner :ninja:

this is been an ongoing problem on dyno its sweet on the road in spikes even with the boost contoller of it boosts to 12psi

even with a perfect EBC it'll still spike a bit - I'm surprised your tune is so close to the limit that a tad more boost causes knocking. Why not richen up the tune (or take out a tad of timing) a little so at least you can drive the thing properly whilst identifying your issue :ninja:

Edited by TommO

Thanks everyone, its really fustraiting me I had the spike problem with it before, i was informed that the OP6 housing will fix it. but im back to square 1

I'm to the tuner 2moro

if i get them to tune

13psi high boost do on the road i should get 15psi

8 psi low road 10psi

maybe that will work

why don't you just have one tune at one set boost, and control the power with your foot?

I have one tune running 300rwkw and 18psi of boost.

When I want half power, I use half throttle?

Edited by The Mafia
why don't you just have one tune at one set boost, and control the power with your foot?

I have one tune running 300rwkw and 18psi of boost.

When I want half power, I use half throttle?

how do you do that when its on man.. all you wanna do full throttle and punch the gears,

how do you get 300 stock engine no knock

how do you do that when its on man.. all you wanna do full throttle and punch the gears,

how do you get 300 stock engine no knock

a decent tune.

I ran 370rwkw, no spike, no knock.

Its a combination of things.

Plus your running a PFC - so you cant have two maps unless your running a datalogit and change it everytime you change boost setting.

Power/boost is controlled by the right foot. I ran 24psi daily without issue

a decent tune.

I ran 370rwkw, no spike, no knock.

Its a combination of things.

Plus your running a PFC - so you cant have two maps unless your running a datalogit and change it everytime you change boost setting.

Power/boost is controlled by the right foot. I ran 24psi daily without issue

370rwkw with the RB25?

Sounds like a handful lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...