Jump to content
SAU Community

Recommended Posts

Found this while browsing some forums this morning

HRT427

Holden Special Vehicles today announced that it would not go ahead with production of the HRT427 “Supercar”.

Fifty firm orders had been placed for the vehicle, with an unexpectedly high proportion to be for road use. HSV’s desire to build the car to the highest level of safety, engineering integrity and excellence to meet the expected asking price of $215,000 was not achievable at the (restricted) 50 vehicle build level.

To achieve a road car level of specification would have required significantly higher investment levels and resultant higher recommended retail price. Further, HSV was not prepared to build more than 50 units as this would seriously degrade the exclusivity of the very exciting 427 model, nor was HSV prepared to lower the specifications from that of the original show car intent, which may have diluted the integrity of the concept.

HSV expressed great disappointment in not bringing the 427 model to market, as the prototype vehicles that were completed had achieved their engineering objectives and vehicle intent. HSV’s General Manager, Chris Payne, confirmed “The unfortunate and disappointing decision was one purely of business case economics that could not be made viable given our price and customer studies.

“The decision is particularly disappointing as the prototypes already demonstrate the engineering prowess of HSV to develop and build high performance supercars that can compete with the best marques in the world” he added.

HSV will be in direct contact with the fifty customers who were scheduled to become owners of the 427.

“We have some other very exciting and interesting concepts coming down the track that will continue to shape HSV’s leadership in the Australian performance car segment” said Chris Payne.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/19256-hrt-427-has-been-canned/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

HSV’s desire to build the car to the highest level of safety, engineering integrity and excellence to meet the expected asking price of $215,000 was not achievable at the (restricted) 50 vehicle build level.
HSV was not prepared to build more than 50 units as this would seriously degrade the exclusivity of the very exciting 427 model, nor was HSV prepared to lower the specifications from that of the original show car intent, which may have diluted the integrity of the concept.

if that makes sense :(

There are going to be fifty wealthy Holden fanatics out there, that are going to be mighty pissed off at GMH I am thinking.

If the idea was to really get the blood stirring amongst the Holden fraternity, they have certainly done that, but not in the way they intended.

I think it is called shooting yourself in the foot. Duh.

They probably figured it was going to be a financial loss right from the start, but worth it from the PR and product exposure point of view. Advertising is horribly expensive any way you go about it.

Probably now, they realize we are entering into another long term worldwide depression, and the car makers are fighting for survival. It is not now a question of how much profit they will make, but how long they can go on re-financing their debts before they go bankrupt for the last time.

In the 1920's there were over two thousand public companies listed in USA that declared their main business activity as "automobiles, or automobile parts manufacture". After the 1929 to 1935 stock-market crash, only THREE out of the two thousand survived. (Ford GM and Chrysler).

Back then the boom technologies were wireless, aviation, and automobiles. Now it is computers, software and the internet, and it is all crashing into a great heap just as it did last time.

In recent times we have seen one-tel, ansett, HIH, and other large companies just cease to exist. There will be many more.

Hahah, this is great. The HRT 427 was HSV's answer to everything. Giving then international Street cred, a porche Eater, Entry into events like the Bathurst 24hr and GTP championship and give Holden fans bragging rights that an HSV could beat most things on the road. This makes HSV look soo bad after talking it up so much, and being every HSV lovers poster boy.

My only wish now is that they now over turn the Bathurst 24hr Decision as I was under the impression it was for production cars, and the HSV was allowed to race because it was going to be making a copy of the race car (the HRT 427) for production, wouldn't this make that result invalid?

Greg.

yup, exactly my thoughts if you ask me! How can they get away with that.. seems like a pretty blatant flaunt of the "production" car class rules if you ask me. Saying it will be produced, and then canning it.

I saw one at the Melbourne Motorshow, and it definitely had enough enhancements to make it seem a little different - but it still looked like a Monaro.

Well guess Holden still doesn't have anything that is quicker out of the factory than you're average gts-t :(

Warpspeed - man you are mr doom and gloom. At worse Holden will eventually just start using overseas drivetrains rather than trying to engineer their own..but holden as an entity making commodores will be around for a long while I'd say.

I think at Bathurst they were in a prototype category so they are ok there, but in GTP Nations Cup they need to be mass produced cars, 50 or so from memory, so seeing the only ones made were race cars they should be made to run the normal road going puss Monaro

They were allowed to do it as the race needed some big names, Holden, 427 Monaro, some recognised drivers all helped the profile of the race.

I think its a shame its not getting built, it would have been cool to see an Aussie limited edition car that had more then just new badges and wheels.

Maybe CSV will have the balls to build a sh1t hot Monaro in the same light as the HRT427.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...