Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Hells yeah, that's better than my guy.

I'm in mate.

cool.. even if they ae shit, for $16 who really cares?

i've emailed them my address and will letyou know whenthe soarer set arrives and i'll take some pics

hopefully they will make them and put them for sale on eBay thus saving me the hassle of having to organise distributing them all..

Also remember there are a couple of different colours of buttons across various models.....

Button colour won't matter, as the stickers are text only, everything else is clear see through.

Button colour won't matter, as the stickers are text only, everything else is clear see through.

Hmmm, wouldn't you see the Jap writing as well then ???

Check out the ones on ebay above, they are black.

If they do not match the colour of your buttons closely, they may look a bit poxy....

Awesome, thanks mate. Will be waiting!

ok i've uploaded two pictures of how it turned out, but let me first explain..

the soarer buttons arrived via express post and the seller has kindly given me this set to have a look at myself and see the quality

i lined up the buttons and my first impressions were

- the buttons are the set specifically for the soarer so as their buttons are all smaller, there were none that were of a size big enough to cover an entire button so i couldn't really get a full idea of it

- the colour of the sticker was a gloss jet black, but the buttons we have aren't as strong in colour, more of a dark-grey-ish matt black

so i cleaned the buttons and stuck on one of them to see how it looks

note: this requires a set of tweasers to line up peroperly.. i did not line it up properly because i was in a rush. i also did not stick it down fully because i had intended on removing it immediately after and didn't want to it to leave residue

the pictures show how it looks

my impressions:

- you can see the colour is a little darker

- you can also see that its the wrong size. i believe that if it were the correct size it would look much better you wouldn't even see the edges

- you can also see that i haven't stuck it down proerly and that it is on an angle

- i think it looks good if it were able to be made in a matt finish

so what does everyone think for $16 a set?

i have measured out buttons and will give him the correct sizes...

should i tell him:

a) go ahead

b) go ahead, but make the buttons a different colour

c) go ahead but make the stickers a "matt" finish like the stock buttons

d) don't bother we don't like them..

personally i think option "c" but i'll wait for a couple of opinions before i tell him exactly what we want

cheers,

Warren

post-2094-1195016879_thumb.jpg

post-2094-1195016901_thumb.jpg

in case anyone wants to know, i will also give him the following information:

top row sizes:

22mm horizontal

18mm vertical

words: NAV / SPLIT / VIEW / INFO / MAP / MENU

bottom row sizes:

20mm horizontal

11mm vertical

words: IMAGE / TV / ZOOM IN / ZOOM OUT / BACK

in case anyone wants to know, i will also give him the following information:

top row sizes:

22mm horizontal

18mm vertical

words: NAV / SPLIT / VIEW / INFO / MAP / MENU

bottom row sizes:

20mm horizontal

11mm vertical

words: IMAGE / TV / ZOOM IN / ZOOM OUT / BACK

Yeah,

If they could match the colour to the stock buttons it would make it much better.

Could you get him to make them to size?

If not size, i'd be happy to try a set if they were correct colour in matt finish.

Cheers

he will make them to our sizes, its just that the set he sent was a set for the soarer whichhas much smaller buttons

he has yet to make any for us, and was waiting on the outcome of this to determine if we wanted to go ahead, then he would cut them to the correct sizes and put the correct words on for us

as far as the colour goes, i feel that if they were in a matt finish the colour would be right, i think its just the gloss that looks funny

maybe i'll see if he can make a set to the right size and matt as a second test. i'll happily pay for a test set that is V35 specific but i'm not sure if they will make a "one-off" or if they only make in batches

he will make them to our sizes, its just that the set he sent was a set for the soarer whichhas much smaller buttons

he has yet to make any for us, and was waiting on the outcome of this to determine if we wanted to go ahead, then he would cut them to the correct sizes and put the correct words on for us

as far as the colour goes, i feel that if they were in a matt finish the colour would be right, i think its just the gloss that looks funny

Yeah well i'm in.

Once he has made them. Will he place them on ebay so we can buy them off him direct to save you distributing them?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...