Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...

So this arvo a mate and I went at it to try and put in my HKS Cams, HKS Cam Gears and Greddy Rocker Stoppers!

Before :

P1240257.jpg

And thats is it... there is no after cause we had to bail out, the cams I got came out of a Black Top SR with VCT, I was told that the cams should still fit in a Red Top SR but we cam across a slight problem. The cam bolt the bolts the cam gear onto the actual cam itself does not go in the cam due to the cams being specified to go into an SR20DET with VCT and the bolt is to big, So my question is can I retain the cams and use a cam bolt out of an VCT SR20 cut it down in size ( as they are longer to go through the VCT etc ) and bolt up my cam gear and put my cams in and done? Or do I have to get cams to suite Red Top only?

Bit of a bummer cause after cams were done everything else was going to follow and wiring also pretty much, now I have this problem... will be a pain to buy brand new cams when I had plans for other things.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4389243
Share on other sites

No one wanted it so I kept the thing... still think i should of flogged it off... oh well. The Lobster was all done in Japan and came with the SR when I bought it but I eventually sold the FMIC kit off to make way for other things.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4390424
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Blitz Top Rad Hose and Apexi EL2 Fuel and Oil Press Gauges

P1110257.jpg

CUSCO Rear Strut Brace

KTS Rear Sub Frame Brace

KTS Rear Camber Arms

KTS Rear Craddle Mounts

Silk Road Craddle Brace Kit

Kazama Rear Toe Arm Brace

Front Chassis To Front Reo Brace

BOSH 023 Fuel Pump

SARD Fuel Regulator

P1190261.jpg

More to come :P

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4453645
Share on other sites

  • 4 weeks later...

i have been doing research about dropping a sr20 into my track built r32 for a while.

i currently run a r32 rb25de + t and we decided to a ) wait untill that pops as its been going strong and B ) put a S14 black top in as they are a better motor but that makes the whole job more expensive.

i also have the D-Max rear boot spoiler and roof wing the roof wing is yet to be painted and fitted. fitment on both the items is spot on. you really do get what you pay for.

about the only thing i would change now would be the front bar as i find the GTR bar just doesnt match any other kits. i have a full GTR front end on mine and we fitted up a B&N kit and then took it back off. i have gone back to stock GTS-t side skirts as they match the look better.

also what is that very JDM looking part on the back of the bonnet? what is it called or who makes it ect?

sorry for crapping on its just this car is very similar to mine althoe mine is 2 door.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4500158
Share on other sites

Nick, if you buy it, I'll bring it down to melb from brissy for you when I drive down... sometime, as long as you're not fussed on waiting for me to drive down (could be a month or so).

I gotta bring the ceffy down and bring the R32 up sometime soon once its out of the workshop.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4519840
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...