Jump to content
SAU Community

Which Gear Box Oil do you use??  

140 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Redline Lightweight ShockProof®

A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads (not recommended for most syncro-type transmissions). It has excellent low-temperature flow which allows easier shifting when cold. May be used to obtain maximum power transfer in racing differentials which do not see high temperatures. Similar to a 75W140 gear oil, but with the lower internal friction of an SAE 30 motor oil.

Used in most road-racing differentials with moderate power and dogring racing transaxles.

Yes not recommend for MOST syncro-type transmissions as it says.

I actually got the guys at Motor Traders to check the Redline book for what they recommend for the RB25 gearbox's & this stuff is the go. Either that or SuperLight shockproof. The Lightweight is recommended if you do track work though.

Haven't put it in yet, going to be interested to see how it goes.

I tried Mobil 1 on my crunchy gearbox (R33 GTST) and when it didn't make any difference I put a tube of Nulon in which made a marginal difference for about 100km.

Just put in Redline shock proof light weight and had an instant improvement - still a bit notchy but not a single crunch yet after about 200 km and a track day.

penrite oils all the way. replaced mine about 2mths ago. still going like a dream. smooth, no grinding.

on extended hard runs, the oil stays about 25degrees cooler than what was originally in there. + i could used to feel the heat coming through the centre glove box.

penrite keeps it cool, well lubricated, and smooth.

have converted all my mates.

penrite oils all the way. replaced mine about 2mths ago. still going like a dream. smooth, no grinding.

on extended hard runs, the oil stays about 25degrees cooler than what was originally in there. + i could used to feel the heat coming through the centre glove box.

penrite keeps it cool, well lubricated, and smooth.

have converted all my mates.

Which Penrite oil did you use, tossing between Penrite & Motul 300

  • 4 months later...

I put Castrol VMX80 in rb25det box and it's not great. Doesn't crunch, but doesn't shift nicely - not sure if notchy is the right term.

I did have the car on stands when I filled it, but surely the small angle wouldn't make much difference?

Should I try a different oil, or put in a tube of Nulon G70?

Edit: Put some Nulon G70 in today. Will give it a few hundred km's and see how much difference it makes.

Edited by bombastic
  • 1 month later...

Have just done GB fluid change and I used Penrite SIN 75w-90, not sure what was in there be4 but first test drive the difference was noticeable and after the car warmed up I gave it a real pantsing, smooth gear changes and reduced transmission noise in the cabin-approx 2L used

i use redline shock proof,and put that in all the evos,gtrs and skylines i work on,on 1 particular gtr i worked on wouldnt get 4th without crunching,i changed the oil and put in redline and absolutly instantly out on the driveway it was smoother and and got 4th perfectly,also another gtr makes 550hp at all fours with standard gearbox and twinplate o.s giken with redline shockproof in it,and still goin strong for 3 yrs now,it could be the oil or could be luck,u decide.......

Edited by HIJAKD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...