Jump to content
SAU Community

Recommended Posts

I like the system in NSW but, i kinda have respect for it, advertising the camera ensures they get the end result they want ie people slow down at a hot spot and isnt a simple money grab

Agree andy..

when i was driving around in NSW on the way too woollongong its soo tempting to speed up and down the mountains.. and the big mofo signs catch ur attention and send u back to reality.

might i ask wher are theses speed reading signs.. i havent seen any around .. but then again i dont venture more than 15kms from the M1.

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

For those who are concerned with fixed cameras, get a TomTom and add them as POI's(Points of interest) and you can set your TomTom to give you an audible alert everytime you are within x distance from them. I currently have this setup for Police stations so I know to have the car in a higher gear then needed to keep the sound down.

I think if they are signed like in NSW it is a good thing, as you see the signs and slow down so the desired outcome in high accident zones is achieved. Better than the mobile cameras that they hide in the shrubs!

Why doesn't any australian state make a defensive driving course a compulsory part of getting your Ps or full license? Germany does and look how few accidents they have for the population! They also have cops who go around recording on a video camera peoples bad driving. They then pull them over to explain why what they did was dangerous, not hand out fines. That would be so much more useful!

Tarragindi off-ramp (M1) on Brisbane's Southside

Bruce Highway at Burpengary

east-side of the Story Bridge targeting vehicles traveling from both directions.

Can anyone with a GPS give me the lat and long so I can store these in my Tom Tom?

Thanks :teehee:

Edited by CanberraR33

Biggest problem I see here in QLD James is the Police and government only seem to consirntrate on speeding and how to reduce speeding cars on the road.

I dont know the specific percentages, but I reckon at a good guess that speeding is probablly the cause in maby less than 20% of all accidents.

The fatal 4 as they say makes up for over 95% of all fatilities. So what are they doing to reduce people from driving tired? What about making car makers to install a system where the car wont start until the seat belts is clicked in? Also what about more random breath testing, I know I have not been pulled over for that in years.

I reckon the reason they concerntrate on speeding is because its raising money from tickets, and its easy to monitor and issue fines with the current technoligy around today.

I personally believe the state government and federal government need to spend some time and look into possible solutions to lowering fatilities in car accidents by looking at the other 3 major causes of accidents (Driving tired, seat belts and drink driving). The look at he federal black spots where there are always accidents and find a way to redesign the road to be more suitable to the conditions rain, hail or shine. If this means lowering the speed limit then do it. If it means putting in a cement barrier in the middle than do it, maby some extra signage and line marking might make a world of difference.

Anyway enough from me for now, I just believe they are not doing enough and spending the tax payers dollars in the wrong areas. Im not saying dont have speed cameras cause they are a deterant and very usefull to slow speeders down. But please look at other ways to reduce road tolls, look at a better way to spend the money raised from speeding fines and use it to improve black spots and most importantlly driver education.

Not to mention that any accident that usually ends up being driver inattentiveness tends to get marked as excessive speed because assholes don't own up to the fact that they weren't paying attention.

This also includes not driving to the road and traffic conditions.

what really annoys the shit outa me is people who do 70 in an 80 zone, then continue to do 70 after it has changed to a 60 zone. they just couldn't give a f**k about the rules just need to do their own thing grrrrrrrrr that rages me.

it sucks the enough is enough campaign has failed, i think the target was 320 deaths, which has been exceeded twice in the past two years. such a waste

I dont know the specific percentages, but I reckon at a good guess that speeding is probablly the cause in maby less than 20% of all accidents.

Speed doesn't cause accidents, failing to give way causes accidents. You can't run into other cars/pedestrians if you follow the road rules and give way where required. Speed can contribute to an accident (there is a big difference between causing and contributing) which is what the media will always focus on.

The fatal 4 as they say makes up for over 95% of all fatilities. So what are they doing to reduce people from driving tired? What about making car makers to install a system where the car wont start until the seat belts is clicked in? Also what about more random breath testing, I know I have not been pulled over for that in years.

I reckon the reason they concerntrate on speeding is because its raising money from tickets, and its easy to monitor and issue fines with the current technoligy around today.

Three pretty simple reasons for speed cameras:

1. Speed cameras are cheap, people are not. How many cameras can you buy for $50k? And that's a once off payment.

2. Speed cameras can fine multiple people per second in the right location. You can't raise those kinds of dollars with real police doing real police work.

3. People are so used to being bent over now we have grown to just accept it.

Anyway enough from me for now, I just believe they are not doing enough and spending the tax payers dollars in the wrong areas. Im not saying dont have speed cameras cause they are a deterant and very usefull to slow speeders down. But please look at other ways to reduce road tolls, look at a better way to spend the money raised from speeding fines and use it to improve black spots and most importantlly driver education.

I don't have a problem with speed cameras either as they serve a purpose. I have a problem with the government touting these cameras as "saving lives" which the ignorant public swallows hook, line and sinker. We have no one to blame but ourselves because we vote these people in and we accept the crap they dish out without question.

Join politics then Marki...

Have a no speed camera policy... :yes:

I can see it now;

VOTE 1 Marki Hanson

"I believe in doing 100 in a 60 zone and getting away with it, I believe in O plates for old people, I believe in 180sx's beating Skylines in hill climbs, I believe in having a relationship with your first cousin should be legal, I believe in Ben Cousins promise to kick the habbit"

Would be funny, like the "National Womens Party" or "The fishing party" whats with those right wing nutter on the ballet paper???

you heard the nazi mod. VOTE 1 Me..

hanson..?? i did not have sexual relations with that woman!!!... maybe

ive never been done for speeding its always RBTs and smacks for having mods on my car.. in the GTR.. i got pulled over for speeding up the back of a cop and backing off. he couldnt prove my speed so he smacked my wrist.. i enjoyed it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...