Jump to content
SAU Community

Recommended Posts

That's a nice one Nick but it's not quite what I'm looking for. Want either a series 2 or 3 with some nice aftermarket mods.

thanglongz, 4g's is a bit too low for me buddy, would rather strip her myself, only costs me my time. Got my new turbo and such on there that will hopefully make me some good money to go toward my new ride :P

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Well I was gonna get the Veyron as my work car and hook up a towbar to it so I can carry a trailer but there's no How To's on the net of how to get that sort of setup going. If you have any ideas, let me know :P Series 2 is 96 and series 3 is 96-98 IIRC...

Steve, that's a nice one, problem is price goes up when they have to comply it to take it back to standard. Would prefer to buy one already in the country, if it's interstate, so be it, don't mind picking her up and having a nice road trip bringing her home!

Have you stripped it yet?? All this talk and it could have been stripped by now!!

I know of some streets in Elizabeth that you could park it on, garantee it will be stripped in half an hour :laughing-smiley-014:

All you need are a few 6packs and Winny Blues to exchange for the parts before they leave the street. :thumbsup:

I know of some streets in Elizabeth that you could park it on, garantee it will be stripped in half an hour :laughing-smiley-014:

All you need are a few 6packs and Winny Blues to exchange for the parts before they leave the street. :verymad:

Winny Blues??? No way still too much, They run the bulk pack, Horizon 50's mate!! :laughing-smiley-014: And you better make those 6packs VB!!

Winny Blues??? No way still too much, They run the bulk pack, Horizon 50's mate!! :laughing-smiley-014: And you better make those 6packs VB!!
WRONG Darren try horizon's :( there a little cheaper ,, or used to be havnt smoked in over 6.5 years

Isn't that what i said?? Cheaper quality and buying bulk, although they prob go thru 50 in a day!!

Can we claim to have officially hi-jacked this thread now LOL (sorry Heslo)

Be careful that they dont escape into the jungle - (aka front lawn unmown for 3 years) before you get the parts off them. I heard of a friend who bought a house near Elizabeth, he cut the front lawn and found 2 cars and 3 families of squaters.

Edited by 4door_Sleeper
I heard of a friend who bought a house near Elizabeth, he cut the front lawn and found 2 cars and 3 families of squaters.

is that all? i find that hiding in my mailbox every morning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...