Fitting Pod + 02 Sensor :)

[R33S2]

here is my effort, it took ages to get right in carboard and the final ali cut out isnt perfect but works ok

[Col-GTSX]

That looks pretty good terry...

Also like your filtered BOV

[53XYN]

i go tmine through Hi Octane Racing Syd .. Universal box for 32 , 33 , 34's 34 ones will have to trim a bit if u have custom cooler pipes i'll see if i have his contacts

[Black Ninja]

i go tmine through Hi Octane Racing Syd .. Universal box for 32 , 33 , 34's 34 ones will have to trim a bit if u have custom cooler pipes i'll see if i have his contacts

hey Vish..post up some pics..

[markimak]

here is my effort, it took ages to get right in carboard and the final ali cut out isnt perfect but works ok

woah nice terry.

i was gonna go that extravagant with mine but cbs.. mines only to keep popo happy..

im using std IC holes in chassis for air flow

what bout u.?

[R33S2]

Im still using the standard piping, that BOV is now sitting in my garge, I put a temp sensor in there.

[Col-GTSX]

What sorta temp sensor you got Terry?

[R33S2]

It is a commonwhore VN type, good thing is they are $15 new and the plug was free from ABC wreckers.

[Col-GTSX]

Oh thats right your using Microtech...

Was wondering what display you were using to read the temp singnal...

So whats the difference like for you in terms on intake temp at 60kph light throttle just cruising and 100kph light throttle just crusing???

As my car I had no difference in temps until you put your boot into it... It seems reguardless of the air flow in the front the temps stayed pretty much the same and only changed on putting your foot down as the air compresses and hence heats up...

[R33S2]

I was told that it is more to do with sitting still ie drag strip or traffic lights, when the air is not circulating and also radiated heat that soaks the pod, I really didnt see a performance gain and I did it because my tuner recommended it.

[Col-GTSX]

Oh sorry Terry I think me mis-understood each other...

I thought you had the temp sensor hooked up to monitor the temps via a gauge, but you must have it feed into the microtech as a data feed to vary the tune...