Jump to content
SAU Community

M3 Style Lip Spoiler - Installed

WazR32GTSt
 Share

Recommended Posts

WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted (edited)

after initally wanting the stock spoiler when i was looking for my V35, i deceded quickly that i didn't like it at all. so i went for the no spoiler look.

a while back i finally decided i wanted a rear lip spoiler, and after searching on g35driver.com i found the one i was after

its from Unlimited Tuning, their G2 lip spoiler.. ordered in from the USA

well after recieving it a week back i finally had it painted and fitted today..

my first impression when i picked the car up was the mounting position. from the pictures i saw from g35driver, it is supposed to be mounted about an inch rearward than it is. i asked the painter and he said that this position is where it fit best over the bootlid and any further back and the front of the spoiler lifts up a little.. the colour is a great match and the finish of the painting is awesome upclose

to be honest i'm happy that the spoiler looks as i wanted it, but i'm a bit dissapointed with the mounting position

and to make things worst they used some kind of glue to mount it, the same thing they use to mount windscreens in place, so its not as easy as peeling it off and re-mounting it. i'm not sure of if or how they can remove it

i'm going to take it back tomorrow to get them to move it rearward however they can, i'm really quite dissapointed

well thought i would vent a bit and get some opinions while i'm at it and see if anyone has experience with this glue they talk of

cheers,

Warren

post-2094-1195633386_thumb.jpg

post-2094-1195633474_thumb.jpg

post-2094-1195633486_thumb.jpg

post-2094-1195634049_thumb.jpg

Edited by WazR32GTSt
Link to comment
https://www.sau.com.au/forums/topic/194692-m3-style-lip-spoiler-installed/
Share on other sites
WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted

here are some pics from others that have installed it.. you can see what i mean by them mounting it more forward..

the red car is the one from their official unlimitedtuning website..

does anyone think that it looks ok where it is now, or am i right in feeling a bit dissappointed?

post-2094-1195633923_thumb.jpg

post-2094-1195633944_thumb.jpg

post-2094-1195633959_thumb.jpg

G7 Collaborator

G7

Posted
Posted
here are some pics from others that have installed it.. you can see what i mean by them mounting it more forward..

the red car is the one from their official unlimitedtuning website..

does anyone think that it looks ok where it is now, or am i right in feeling a bit dissappointed?

Sorry to say- they stuffed it BIG TIME. Does not flow at all.

WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted

i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

post-2094-1195640434_thumb.jpg

NISMO Grand Master

NISMO

Posted
Posted
i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

Hey Waz,

great idea, love those. But the definitely fu9ked it.

Worry about the exam first, car second. It's a spoiler, and even if they have to scrape it off the boot lid is re-sprayable.

Cheers

Bobby

Blue Arrow Enthusiast

Blue Arrow

Posted
Posted
i have a serious exam tomorrow for uni and i'm furious about the stupid spoiler.. hope i can get it out of my head before the morning

i'm going there straight after my exam and getting them to re-do it. if the urethane doesnt come off without scratching the paint i'm going to get them to re-paint the whole boot and they can pay for it

man its just been eating at me all night since i got home..

another pic of how its supposed to look is below. if you compare it to mine you can see how its supposed to flow and how mine is way off..

its partially my fault. they said they can't mount it flush with the rear as it doesn't sit right, and i said fine. i didn't think they would mount it half way up the boot though..

bring it back and show them a picture of how it should be mounted.

good luck.

WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted
Hopefully the urethane hasnt set too hard.

Otherwise they will need to get a caramel wheel to get the remaining glue off.

Rather than run a bead along the whole way of the wing- 4 blobs should be enough.

apparently it sets in 4hrs to a good strength and fully sets in 14days

i'm going to take it in tomorrow so its as early as possible to make it as easy to get off as possible..

expensive lesson learnt for me - i think i'll leave the car as stock as i can for now..

WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted

just to update everyone..

went good on my exam :rofl: had a patient with a "borderline personality disorder" that i had to interview andmake a management plan.. not the easiest thing in the world

went good with the boot --> spoiler removed, no damage to boot or spoiler!

spoiler now for sale, and potentially already sold to Unique!

  • 4 weeks later...
wabbo69 Enthusiast

wabbo69

Posted
Posted

I now have the same car as yours without rev cam but I am going with the clean no spoiler look.

Freakin love the car. Best ever.

G

just to update everyone..

went good on my exam :) had a patient with a "borderline personality disorder" that i had to interview andmake a management plan.. not the easiest thing in the world

went good with the boot --> spoiler removed, no damage to boot or spoiler!

spoiler now for sale, and potentially already sold to Unique!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...