Jump to content
SAU Community

Recommended Posts

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

still have parcel shelf, excellent condition, no mark/sholes

sorry don't think I have it, reckon I left it on the engine in the end, if I can find it I'll send you a PM

just ? did you find it?

just ? did you find it?

nah sorry definitely don't have it

do u sell only the lhs only..?postage available included with the price..?

thanks

LHS only is $80

or the pair for $120

postage is $20-25 Aus wide

recieved everything fine n its all in, cheers mate, pleasure doing dealings wit ya :)

no worries, I asked them to put fragile stickers on it....needed a bit of a custom box or should I say 3 boxes to send it!!!

re: alarm PM sent

Hey PT you want to sell me the RH rear tail light for $60 and $20 freight to QLD? Looks like vince88 wants the LH so between me and him we have split the pair.

Edited by shajar

if both sell at once for $60 I can do it but only on that condition, vince88 never got back to me, otherwise $80 for the RHS

or you can buy both and sell the other one yourself

Hi mate, do you still have the ashtray? If so would you accept $20 inc. freight to Cairns QLD 4870?

Also looking for the plastic part of dash under the steering wheel, the part your knees hit.

Edited by shajar
How much for the fuel cap and postage to Perth?

$10 for the fuel cap

postage is $5.30 normal post or $7.40 express post

Hi mate, do you still have the ashtray? If so would you accept $20 inc. freight to Cairns QLD 4870?

Also looking for the plastic part of dash under the steering wheel, the part your knees hit.

sorry ash tray sold as has dash, stereo surround and centre conslole

the other plastic piece you refer to, if it has a fuse box cover on the left of it then I'm pretty sure I still have it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...