Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

read the testimonials.

apparentyl channel 10 news has a story on it

some guy from melbourne has already bought some

Out here down under, our local authorities have gone greedy. They are putting cameras everywhere in the name of safety, but to be booked for doing 63 in a 60 zone is just revenue raising. So I got tired of it and started to fight back. I got me a few of the Photoshield covers and that spray formula. You said it; I haven't got a ticket since. They can kiss my rear end for all they want but they won't know who I am when they look at the film at the end of the day. Thanks phantomplate.

Trevor M

Home Builder

Melbourne, Australia.

Anything that blocks ur no. plate from view is illegal and has been for ever. U cant say that this sort of thing is new. Its a big fine if ur caught using something like this, more than a lifetime of speeding tickets. (I think up to $20k??)

I used to have a bubble cover over my plate that I sprayed with a releasing agent that worked really well. Used to reflect even a torch light. But in the end the cops pulled me up all the time and told me of for it. Have not had it for years but maybe worth a go again.

Mick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...