Jump to content
SAU Community

Recommended Posts

Hey fellow RB lovers,

I didn't start the car for a week because I had to replace the crossover pipe. When I tried to start it up it was totally dead (i may of left one of the interior lights on). So I jump started it and it started up fine, I left it running for bout 2hours to charge. I then switched it off. I tried starting it again but now it just clicks when I turn the key and the internal lights flash.

I jump-start again but left if longer...bout 4hours, din work again. I repeated the process a 2-3 times, the damn battery wont charge!!! So I charged the battery using a battery charger, din work either. and also checked the fuses aswell!! What shud I do? Maybe a new battery but which one?

Please guys I need ur help!! :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/195568-flat-battery-please-help/
Share on other sites

To charge your battery go for a little drive. It's better than just leaving the car there idling. The higher the car's revving the more it's charging.

Best to get a new battery. If that still doesn't charge up and gets flat. It could be a problem with your alternator.

buy a new battery. go with a gell long life battery or a sealed battery. but they are a bit pricey.

cut your losses man. stop wasting time and money. do it, and move one.

WTF. NFI Y It DOUBLE POSTED.

Edited by r33cruiser

like said, buy a new battery. those fluid type leadcell bateries will die completely if you run them flat. if you dont want to have to worry about that again, spend a bit more money and get a deep cycle, sealed battery, like offered by optima, or odyssey. these can be run flat, and recharged many times, without killing the battery. people get up to 8 years life out of a battery

check the fluid in the battery mate. its only like $3 to top up.

then take it for a spin for about 20 min..

Should be fine after that

unless you have to many dead cells in the battery

he should be running a sealed battery if im not mistaken.

just get a new bat if you can afford it.

he should be running a sealed battery if im not mistaken.

just get a new bat if you can afford it.

Cheers guys! I jump started it and took it for a run. when I came back and turned off the engine...it wouldn't start again. I'm gonna take it to a mate of mines to check if it is the alternator or the battery. How much is a good battery these days?

Edited by HaZ3inSKY

it wont be the alternator mate. hook up a charge light. u will be able to see the charge output from the alternator to the batt. u will find it is in the green.

for another alternator test. turn on your headlights, and rev it. now if the lights dim and brighten really noticably it MAY be the alternator failing to put out enough charge, but fairly unlikely.

Sounds like it was just the alt. regulator and/or brushes... they trick you into buying a whole new one? Your windings would of been fine for a car so young

Your lights wont dim if you rev it. They will dim if you dont cruiser

I let my work van idle for 5hrs last weekend, jump started it then went inside to watch the final round of the v8's then went out after to do some shopping and realised it was still idling away in the backyard, ahh toyota's - love em!

stupid nrma battery is still dead tho.

news flash... if you flatten a lead-acid battery and leave it that way for more than a day s it is CACTUS. if your battery goes flat overnight and you jump start it the next day and take it for a drive you'll be ok, if you leave it for a couple of days or a week then buy a new battery. don't even try to charge the flat one, it has sulfated and is no good.

lead acid batteries will last for years if you store them fully charged but leave them dead flat and they'll die after a day or two. after that they'll never hold a charge again.

probably the damage to your alternator was caused by trying to run the car's electrical system and charge a dead flat battery at the same time. should have just bought a new battery and put it in when you realised it had been flat for a week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...