Jump to content
SAU Community

Recommended Posts

  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

A guy we know on the Coast hat a RB20DETT and it bascially went like a bag of crap.....it looks to be a waste of money if u dont upgrade the engine example.....stroker kit at least.....or rb30 bottem end.

The simple fact was....in this case.....the this car im talking about went like a bucket of crap...i hope urs works out better.

It came from japan with the twin turbo setup. so it was all done good!

- Luke

hmmm...not parallel turbo setup ..but sequential. The guy on the coast with TT setup. Which two turbos were being used? Like I've been saying, im in Jamaica.... RB30 are NOT a dime a dozen around here :D . YES I know that its not the best bang for buck and NO I'm not trying to fool ppl into thinking i have a GTR :) . I just wanted a different approach on the tuning methods....so CT12s....ae these Turbo starlet turbo...how about that for use.

If used in combination with the Tomei 2.4L stroker kit, what then?

Does anyone have any experience with this setup? Meggala..where are you?

edit: hey...where's my medal for the almost 3 yr old thread resurrection <_<

Edited by 5hift

I don't know what kind of power they can handle, the 1GGTE's aren't that great an engine so I don't think people have done loads to them - all I know is they work on a 2L.. maybe CT12A's from a 1JZ - they handle 280hp stock so they musn't be too bad.. But then again if you are going to increase the capacity of the engine you might as well use GTR turbos...

I don't know what kind of power they can handle, the 1GGTE's aren't that great an engine so I don't think people have done loads to them - all I know is they work on a 2L.. maybe CT12A's from a 1JZ - they handle 280hp stock so they musn't be too bad.. But then again if you are going to increase the capacity of the engine you might as well use GTR turbos...

Something like this.

While rb30's may be rare in jamacia, freighting a turbo (or two) is probably a good option.

rb26 twin turbos will (according to my understanding) spool faster than an rb25 turbo AND push more air.

and they have a combined capacity of 2.6L, not 4.0L.

Unless you can figure out how to get more air in at lower rpm (I vote suprecharger - but then 3 induction aides...?)

I guess at the end of the day you would want something close to 3L worth of (two) turbo(s) (according to the factory) that will still bolt on.

Well, thats my uneducated opinion. good luck with the venture. Since you have the gear, I think you should just stick them on.

But if you wind up the boost, you will probably run lean.

good luck

Josh what I mean is for the same effort a better and simpler solution may be had .

I'm not against people trying things that may not have been done before but for me the end result needs to be good to justify the effort .

For me the drama with RB20's is that good torque is difficult to achieve without a peakier power curve than I want . I reckon the cheapest RB to buy is an RB30 SOHC and the ET exhaust manifold is (should be) easy to get . For power and torque on a budget a second series NA RB30 is hard to beat - depending on the expectations .

Turbos - could be an expensive suck it and see debacle . If I could find them the G11 Charade could be worth a look . Otherwise maybe Garrett T2's or small T25's . Garrett T28's off a GTR with smaller trim compressors may bring it on in similar fashion to a GTR . These use exhaust housings of compact dimensions because this set up is rather crowded on an RB26 . If you can use these housings and dump pipes it would save lots of time over custom fabrications .

Twins will have a weight penalty over a reasonably sized single .

Gotta go , cheers from Goulburn A .

Josh what I mean is for the same effort a better and simpler solution may be had .

I'm not against people trying things that may not have been done before but for me the end result needs to be good to justify the effort .

Yeh thats what I was thinking - If worthwhile gains to be had were there, then yeah go for it - definately.

Respec guys...I'll be sure to let you know if i pursue this buildup. Now im going to go find out if 26 Manifold will fit the RB20 ;)

Unfortunately it doesn't. the bolt pattern is different.

This may sound silly but is there enough meat in the head casting to drill and tap alternative stud holes ? I'd really like to know this myself because RB20/25 HKS cast low mount manifolds are easy to get compared to the rare RB26 version and I want to use the 26 head . Long shot I know but sometimes these things work .

Cheers A .

Rips (Rotorua Import Pro Shop) on this forum (and SDU) makes an adaptor plate which lets you bolt up the rb26 stuff to rb25 heads

edit/ he may also make a adaptor for fitting rb25 to rb26. Find his email and ask him :)

Edited by Bl4cK32
Hi guys, After blowing a turbo gasket, I’m in the process of fitting 2 stock RB20 turbos to my Nissan Syline R32 GTSt. All the work is been done at a engineering firm in Bunbury WA where my dad works.

We are making 2 separate manifolds one for each turbo. Front 3 exhaust outlets to one and the back 3 to the other turbo. There is going to be a balance pipe that goes between both manifolds to equalise pressure into both turbos. We see there is no need to have 2 wastegates so one will be blocked off. All water and oil lines are been ‘T’ . There will be 3” pipes coming off the back of the turbos converging into a 4” exhaust system. Air intake for the turbos will consist on the 1 pod filter, splitting into 2 pipes after the afm then to the turbos. The outlets for the turbos will converge into one tube entering the front mount intercooler then engine.

This project is well underway, and if all goes well will be completed in a month. Before starting this project I had 200bhp running a stock turbo with 13psi, with the intercooler and a 3” exhaust. I have had it down the drag strip with a time of 13.7 @ 167km/h.

I was interested if any one had any comments on how laggy it will be, the power output I might achieve, or any concerns about what im doing. All comments will be appreciated. thanks, Ewan.

I'm running an RB20DETT setup at the moment using twin T28 turbos.

Lag, well, very considerable. At 9psi, i was hitting full boost at around 4500-5000rpm, now im running 13psi boost and making peak power at 7000rpm...

i GUARANTEE you you will NOT make 280rwkw without some serious headwork and bottom end work, not on an RB20 anyway.

As for manifolds, im using RB26 ones, just using a custom fabricated adaptor/spacer plate blah blah blah, allot of custom stuff

What else have you got done to your car??? I would have thought that if a std RB20DET running the factory turbo can make 160odd rwkws at 14psi, and with a std R33 turbo they can make approx 180rwkws at 14psi...

That with 13psi out of a twin T28 setup you should be making considerably more power then what you are making. What injectors/fuel pump are you running, exhaust, intercooler, cat...i recall reading you are running a Microtech...what did the tuner say was limiting the power???

i have a big FMIC, 700hp fuel pump, GTR injectors, custom piping, custom exhaust with split dumps off each turbo, running into a 3" system, through a 3" hi flow cat, adjustable fuel pressure reg, microtech LT8 with handset.

i think he said boost, if i wanted 200rwkw he said u'd need much more boost *shrugs*, lol. At the moment i can't really afford another re-tune so im stuck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...