Jump to content
SAU Community

Recommended Posts

Item: RB26 Engine

Age:Approx 100,000kms

Condition:Good

Price: $4000 or ono

To Fit:GTR or conversion (What car)

Location:Perth, WA

Contact:pm or email [email protected]

Comments:

This engine will be removed from my R32 GTR around the 10th Dec. So you can here it running, have a look at the oil pressure and the overall general condition before that date. I will be carrying out a compression test before it's removed.

Since importing the car in April 2005 I have done around 10,000kms on the engine. Unsure on the exact amount of km's but general condition the engine and paint starting to flake off the plenum would suggest around 100,000.

The GT-SS turbo kit was installed in July last year and has approximately 5,000kms on it. An Exedy 9 Puk extra heavy duty clutch was fitted around May 2005.

The engine comes complete minus the following parts:-

Injectors + Rail + Regulator

Dumps

Wiring Harness

The alternator, power steering pump and aircon compressor are not included.

The cam belt was replaced prior to the vehicle leaving Japan (the speedo read 3,500kms, now reads 19,100 ish).

With a fairly safe tune the car made 404 rwhp on 19psi using a D-Jetro computer (not included in sale but can supply the map).

Please no low ball offers (they will be ignored) and I am not interested in swaps or breaking it up at this stage.

Freight can be arranged country wide. My suggestion is Air Road Direct. I paid roughly $300 to get an RB26 freighted from Brisbane to Perth.

post-8807-1196473187_thumb.jpg

Edited by jonn
Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/
Share on other sites

In Johns defence - not strange at all to want to Just swap engines, even if there is nothing apperntly wrong with the one you are taking out (especially if you are going the next step up in power). It means you can minimise the time your car is off the road. Having an eninge ready to go in can mean having your car off the road for just days, rather than weeks (or months) if you are to take everything out - have it all stripped, measured and machined and then chase the parts you need to build your "tough" RB26.... (or RB28 for that matter)

sorry... just my 2c :nyaanyaa: (going through a similar transition myself...)

So the reason for the new RB26DETT?

Strange to just "Swap engines"

Have you had the compression check done yet?

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3508987
Share on other sites

New engine is an HKS 2.8 with everything done and then some. I didn't want the car off the road for an extended period so I bought a 26 that had spun a bearing and got that one rebuilt.

Compression test will be for peace of mind of the buyer and I didn't want to sell someone a dud. Haven't got the guage yet but will post up results when I do.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3509715
Share on other sites

New engine is an HKS 2.8 with everything done and then some. I didn't want the car off the road for an extended period so I bought a 26 that had spun a bearing and got that one rebuilt.

Compression test will be for peace of mind of the buyer and I didn't want to sell someone a dud. Haven't got the guage yet but will post up results when I do.

Thanks

Thanks Jonn

PM me with the results, as I'm interested in the engine.

Can you also find out how much shipping would be to move the motor from Perth to Sydney (Specific post code is 2518)

Thanks

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3509861
Share on other sites

Thanks Jonn

PM me with the results, as I'm interested in the engine.

Can you also find out how much shipping would be to move the motor from Perth to Sydney (Specific post code is 2518)

Thanks

Air Road Direct quote is around $335.

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3510204
Share on other sites

any one in melb want to buy the turbos off me if i buy the engine? i am happy to purchase engine if i can get someone to put a deposit on the turbos.

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3510535
Share on other sites

any one in melb want to buy the turbos off me if i buy the engine? i am happy to purchase engine if i can get someone to put a deposit on the turbos.

PM me what you would want for the turbo's.

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3511792
Share on other sites

any one in melb want to buy the turbos off me if i buy the engine? i am happy to purchase engine if i can get someone to put a deposit on the turbos.

I would be very interested in the turbos... all id need to know is price :whistling:

Link to comment
https://www.sau.com.au/forums/topic/195895-rb26-engine/#findComment-3512036
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...