Jump to content
SAU Community

Recommended Posts

pretty sure your talking about a vent to atmo wastegate in this instance and not a BOV

so what exactly do you have to do to make your car legal? who do you take it to?

take to engineer first, then take to epa and get a cert from them as well?

No. Modify it, take it to an engineer; they will tell you if it is or is not compliant with ADR. If it's not, you can fix it up so it is, return, and get a certificate; certifying by an engineer that the car is compliant with ADR, thus rendering it legal. The car must then be taken to a weight station, weighed... blue slipped again, done. (last time i went through it anyways :P which was after a defect/rego was also out... the blue slip guy barely looked at the damn thing once he saw the certificate!)

To the best of my knowledge; Atmo BOV's are to do with NOISE emissions.... nothing else! But i can see how it would mess up mixtures also...

pretty sure your talking about a vent to atmo wastegate in this instance and not a BOV

so what exactly do you have to do to make your car legal? who do you take it to?

take to engineer first, then take to epa and get a cert from them as well?

u always get defected for adjustable/programable things no matter wat u do, u will always get devected for anything atmo and there is nothing stopping them eva from sending to the pits or emmissions.

thats how stuffed it is.

Edited by BallSx
so what exactly do you have to do to make your car legal? who do you take it to?

take to engineer first, then take to epa and get a cert from them as well?

Here's roughly what I did:

* Get a list from the RTA's website about the authorised Signatories (those are

engineers that can "sign off" on your car).

* Talk to those engineers closest to me regarding the modifications I planned to

make, and find one that was willing to approve "in theory" all my proposed mods.

Make sure you tell them _everything_ you plan to do.

* Make the modifications, ensuring that I stuck to the plan. Note that now the

vehicle is unroadworthy so you should plan not to drive it.

* Have the engineer inspect the vehicle, and prepare a report - takes about 2-3 days.

If anything needs rectifying before the report is prepared, do it.

* Take the report to the RTA, and file it with them (they will keep the original).

Keep a copy (has to be also signed/stamped by the engineer) in the glove box.

* Drive my modified car around, legally.

The NSW EPA has nothing to do with this process. The EPA was "called into existence"

by the PROTECTION OF THE ENVIRONMENT ADMINISTRATION ACT 1991:

http://www.austlii.edu.au/au/legis/nsw/con.../poteaa1991485/

and administers the PROTECTION OF THE ENVIRONMENT OPERATIONS ACT 1997

http://www.austlii.edu.au/au/legis/nsw/con.../poteoa1997455/

as well as PROTECTION OF THE ENVIRONMENT OPERATIONS (CLEAN AIR) REGULATION 2002

http://www.austlii.edu.au/au/legis/nsw/con...poteoar2002601/

amongst other things (full-ish list at http://www.environment.nsw.gov.au/legal/envacts.htm ).

We're basically concerned with s154-166 of the 1997 Act and s7-19

of the 2002 Regulation - those sections set out the EPA powers with reference to motor vehicles

specially; although I guess the EPA's power to issue PEPs may also be of interest.

Basically, they can issue a notice for repair if a vehicle has anti-pollution gear removed (e.g.

cat convertor, muffler, charcoal canister) or if it is emitting (or suspected to be emitting)

excessive air impurities (the Act has no hard definition for exact quantities, but relates

"excessive" back to the "class of vehicle" - most likely referring to ADR 79); or if the vehicle

has been modified such that it can take leaded petrol when it's not supposed to.

The important bit is that in NSW, these Acts do not mention specific modifications to vehicles

(e.g. no pod filters); only compliance or non-compliance with the emissions requirements.

Regards,

Saliya

Edited by saliya

So to be safe, you need to have a stock looking car, black intercooler, low mount turbo, stock filter box and BOV and then you can mod your engine internals, turbo, fuel etc etc as much as you want!

another reason for atmo BOVs being emissions, would also be the pcv valve is generally plumed in and in theory would vent hydrocarbons(oil vapors) to the atmosphere when expelling the compressed air. noise also plays a big part in it.

not to affend anyone, but harleys generally make more noise than my skyline.

as do trucks, and police sirens. dont forget cops are basically above the law,"theres no such thing as safe speeding", unless youre a cop. 100km/h+ no lights, no sirens, down my quiet street one night(i was standing out the front)

oh, with the enclosed pod filters, wot about ba xr8s? could i use 2 of their pods and be legal?

Just curious, is it defectable if, I'm running a pod filter thats sealed up in the enclosure that cannot be opened. Which is saying there's no proof I'm running a pod filter even if the sucking sound is louder than a vacum cleaner.

Unfortunately there is a lot of double standards when it comes to the law - ADR, EPA, etc. Prime example is noise pollution. Noise is noise and should apply to all types of vehicles and parts thereof. Cars, bikes, and trucks all have different noise pollution levels and are not on the same restrictions. Even within each class of vehicle there are differring categories. Futhermore, noise pollution from pods does not equal noise pollution from exhausts.

Many of the defects are issued at the police officers discretion, so what saliya said is very applicable. Don't be a dickhead and you might not cop a dickhead attitude in return - and a whole lot of fines/defects.

I got pulled up tonight by cops they went through my whole car checked all my papers , Mind you i just finished clearing all my defects and epa defects , All the paperwork i had they had nothing on me , I even invested in a Electronic Silencer i pressed the button before they pulled me up so its sound like a stocker, And when i drove off flicked the switch back to my race exsaust ..

good luck everyone else..

i am going to invest in one of those, especially the way my car lumps now its become much deeper and louder and its kinda doing my head in alittle :S xforce 400bux not bad for a muffler.

Edited by BallSx

i got pulled up a few months ago and the young cop went over my car saying "seats are $600 and 4 points, BOV is $200 and 2 points" etc etc etc, then he goes "i could have your license gone in one go but ill let you go", yet ive never been done for speeding and i consider myself a fan of safe driving. i just think its bs how last night i had to give way to a BA XR8 falcon otherwise he would have smashed into a parked car on the left, yet if i have a few mods but drive sensibly then i lose my license while bogans in falcons keep driving their so called "sport sedans" like p0rn stars. blahh, can't wait till the new GTR comes out then i wont have to worry about modifying ;) factory 0-100 in 3.3 ill be up for that :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...