Jump to content
SAU Community

Recommended Posts

Hi all, cleaning out some stuff I no longer need. Can send the parts anywhere in Oz via C.O.D Post or will accept money order. Please call 0414 224 905 or email [email protected] or post if keen.

-RB25DET Head, basically bare. Has valves 4 are missing, but i think I will have some to throw in it. EC SOLD

-R33 RB25DET Air Flow Meter, off series 1, green stickered. Perfect working order SOLD

-RB20DET injectors, not sure of condition as a pulled them out of a engine I bought to rob the head. They look fine though. $50 set

-RB20DET crank angle sensor, same as injectors not sure of condition. Spins fine and not noisy is also clean. $40

-RB25DET stock turbo exh. manifold. Has light surface rust. $50

-RB25DET HD Daiken Exedy Clutch, pulled out of my R33's old setup. Never slipped, good feel. SOLD **First 3 clutch pics**

-RB30ET HD Clutch, never used it so can't really comment, Looks ok teeth are a little worn. SOLD

-RB30E Non turbo piston set. Brand new in box, Federal Mogul/Sterling cast Pistons .75 oversize (.030) SOLD

-RB30E Pistons, incomplete set 5 only, same as listed above. May come in handy to someone $20 set of 4

-Nardi Steering wheel, drift favourite! Would need re-covering to make perfect, fine for drift car. $100

-R33 GTS-t Stock intercooler. Excellent condition $60

-RB25DET 2 pac painted rocker covers. Look trick, have small paint chips. Breather hole blocked off see pic. SOLD

-RB25DET Standard coil cover. EC $20

-RB25DET Standard cam gear cover EC $25

-RB25DET Standard Inlet camshaft, is in perfect condition. $80

-RB25DET Standard Inlet Cam Gear. EC $50

-"SKILNE" Vic number plates. Brand new, slimline. $950

post-18047-1196838030_thumb.jpg

post-18047-1196838057_thumb.jpg

post-18047-1196838075_thumb.jpg

post-18047-1196838084_thumb.jpg

post-18047-1196838096_thumb.jpg

post-18047-1196838110_thumb.jpg

post-18047-1196838129_thumb.jpg

post-18047-1196838149_thumb.jpg

post-18047-1196838164_thumb.jpg

post-18047-1196838176_thumb.jpg

post-18047-1196838192_thumb.jpg

post-18047-1196838204_thumb.jpg

post-18047-1196838225_thumb.jpg

post-18047-1196838237_thumb.jpg

post-18047-1196838264_thumb.jpg

post-18047-1196838275_thumb.jpg

post-18047-1196838808_thumb.jpg

post-18047-1196838825_thumb.jpg

post-18047-1196838839_thumb.jpg

post-18047-1196838851_thumb.jpg

post-18047-1196838871_thumb.jpg

post-18047-1196838883_thumb.jpg

post-18047-1196838900_thumb.jpg

post-18047-1196838911_thumb.jpg

post-18047-1196841874_thumb.jpg

Edited by nismomiles33
Link to comment
https://www.sau.com.au/forums/topic/196421-various-skyline-parts-rb202530/
Share on other sites

hey mate, im interested in the full set of rb30 pistons + rings.

would you post to syd?

Happy to post to Sydney mate. I only have pistons though, no rings sorry.

  • 5 weeks later...
  • 4 weeks later...
Hey mate u still have the rb20 crank angle sensor??

If so would u post up to brissy?

Cheers

yeah mate no worries at all, just drop me a pm or something and we'll work something out ; )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...