Auto Ecus

[sleepy33]

hey guys i have read all of the threads about ecus in auto r33s

all of them are from quite long ago

there would have to be advances in tech

so would are good ecus for auto skylines now

dont want extremely harsh gear changes

also i was searching on ebay for ecus and i found reprogrammed standard ecus

this is their description

Here is a Japanese tuned ecu by Garage50 tuning workshop this ecu to suit a RB25DET it puts out over 200rwkw @ 12.5 psi with only a front mount and dump pipe and 3" exhaust and bleed valve. it has the speed limiter removed and the boost cut removed also. If you raised the boost you will easily have over 300rwhp, and would get even more hp with a bigger turbo and other mods.This ECU puts out great low to midrange torque with the standard turbo which is great for drifting. Fully tested and working, I try to get all the ecus that i sell onto our dyno to check power output and more importantly make sure they have a safe air/fuel ratio and will run our fuel. We have had great success with these ecus and our feedback proves the results. This has been tested in both Manual and Automatic R33 Skylines series 1 and 2. This is the last one till Feb 2008 as i have stopped importing until next year.

has anyone had any experience with these ecus

is it worth getting somethinglike this and where would i get it retuned in wa

cheers

[4door_Sleeper]

Dont overlook the PFC, I have one in my R33 GTSt auto and have had no problems, (as have others)

Have yet to find somewone who has tried a PFC and had a problem (others only know of "someone" that had the problem, but we can never find "someone" when we look)

[_Ryan_]

E-Manage Ultimate is the way to go for an Auto, do a search. SydneyKid has many posts on the topic of why you need to use a piggyback with an auto. URAS(trent) has a great thread on EMU.

-Ryan

[TTT]

and the boost cut removed also

hmmm interesting, magical removal of things that don't exist.

This is a good enough reason not to buy anything from that buyer.

[SECURITY]

hmmm interesting, magical removal of things that don't exist.

This is a good enough reason not to buy anything from that buyer.

people call boost cut different things. boost cut is hitting a higher afm voltage at a lower rpm i think it was around 3.8v @ 4000rpm and 4.1v @ 5500rpm (i think). programs like the emanage, safc and remaps have the paramters to overcome this.

[TTT]

I know.. but it doesn't cut boost like say in a wrx

[SECURITY]

the wrx's run off a MAP sensor to read boost. when the MAP reaches a certain voltage then it initiates the fuel cut - same as ours except the ecu reads air flow rathe than pressure to cut boost.

the wrx's can be tricked by putting a restrictor in line with the map sensor that reads boost (in their boost solenoid). what this does is moves the boost cut threshold up by a few psi. we try to do the same with the emanage and safc. we 'trick' the ecu by making it read a lower afm voltage by inputing one that would not initiate the fuel cut.

[dangerman4]

the wrx's run off a MAP sensor to read boost. when the MAP reaches a certain voltage then it initiates the fuel cut - same as ours except the ecu reads air flow rathe than pressure to cut boost.

the wrx's can be tricked by putting a restrictor in line with the map sensor that reads boost (in their boost solenoid). what this does is moves the boost cut threshold up by a few psi. we try to do the same with the emanage and safc. we 'trick' the ecu by making it read a lower afm voltage by inputing one that would not initiate the fuel cut.

pfc for the win.

enough said.

[N I B]

I have a PFC in Perth if you want one,Can Tune it for you also.94702222/Steve if you want the PFC.

Nistune equiped Z32 300ZX ECU is also a good option.Real time factory ECU tuning. www.plmsdevelopments.com

[sleepy33]

goin to go the pfc

how much does it cost to have it installed and tuned round bout

[Adriano]

how much does it cost to have it installed and tuned round bout

About $500

[Tangles]

goin to go the pfc

with the auto make sure you get the shift kit mod done b4hand

talk to Mike at MV Autos in blackwood SA

awaiting my gtt pfc now, cant wait

[SECURITY]

ive hooked up the greddy pressure sensor to my emanage and auto shifts are so much quicker with it connected. all i need to do is fine tune it and it will be running sweet.

[DivHunter]

I've been running a PFC in my auto R33 for some time now and it's been great. Just bought a C4 for when I go for more power and the standard auto doesn't like it.