Jump to content
SAU Community

Recommended Posts

Hey,

I need bigger injectors bad as under full load i'm hitting 97% on my injector duty. I don't really want to go to the trouble of putting on a fuel rail. I kow you can still get big injectors that screw in and I guess my question is what is the biggest size CC injectors I can fit into the RB25DET.

Cheers. She needs juice. lol

Link to comment
https://www.sau.com.au/forums/topic/196636-bigger-injectors/
Share on other sites

Nismo 550's will be more than enough for your turbo (they support 300rwkw no problem).

Largest - I used Nismo 740's for mine 369rwkw.

Stock Rail, Stock Reg etc etc.

I think Sard's in the 800 are also direct-ish fit

Nismo 550's will be more than enough for your turbo (they support 300rwkw no problem).

Largest - I used Nismo 740's for mine 369rwkw.

Stock Rail, Stock Reg etc etc.

I think Sard's in the 800 are also direct-ish fit

396RWKW!!! Thats massive man! What are you running?

Cheers for the advice. I cannot wait to get all the kit on. Iv'e gone a bit silly but whatever yeah! Not long till all the parts come in and i'll be aiming for around the 290 RWKW mark. To tell you the truth i don't really want more than that. I still want to be able to drive her on the road.

Cheers

Kane

Nismo 550's will be more than enough for your turbo (they support 300rwkw no problem).

Why do tuners tell me to get bigger then 550cc if they can handle 300rwkw

im looking at between 240 - 260 rwkw

Highflowing injectors are abit cheaper then getting aftermarket injectors but i hear they arnt as good, can anyone confirm this?

Edited by SLYNE
Nismo 550's will be more than enough for your turbo (they support 300rwkw no problem).

Why do tuners tell me to get bigger then 550cc if they can handle 300rwkw

im looking at between 240 - 260 rwkw

Because they are full of shit :D

No other reason, or they are trying to sell you something that you simply do not need.

Because they are full of shit :P

No other reason, or they are trying to sell you something that you simply do not need.

Nismoid,

As I am at the stage of installing a whole heap of gear I need to make sure I make the right decision when it comes to Injectors. Can you point me in the right direction as to where would be a good place to get the standards flowed. Or even someone to talk to about this.

Thanks Mate!!

A good option for cheap injectors is 480cc ones out of manual S15's, they are a direct drop in for R33 RB25DET's.

I'm aiming for approx 260rwkw and 6 of these will easily suffice, and only costing me $280 delivered for all six.

Edited by stolen_s15
Nismoid,

As I am at the stage of installing a whole heap of gear I need to make sure I make the right decision when it comes to Injectors. Can you point me in the right direction as to where would be a good place to get the standards flowed. Or even someone to talk to about this.

Thanks Mate!!

There have been a number of threads with suppliers/prices and so on.

Just search with "hi-flow" "injectors" and you'll be right

Personally i wouldn't use hi-flowed injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...