Jump to content
SAU Community

Recommended Posts

Hey guys am looking at getting an engine management system in the next few months but not sure what to get i dont want to have to pay too much as i dont plan on modifying too heavily. my total plans are FMIC, full 3" exhaust, z32 afm, bigger turbo, fuel pump and possibly injectors i was thinking of getting the greddy e-manage ultimate but not sure if this would be good enough any ideas or comments would be great

Link to comment
https://www.sau.com.au/forums/topic/196732-engine-management/
Share on other sites

Find a good tuner, then get the ecu he/she is most comfortable tunning; as this will get you the smoothest and best tune for your car. An ecu is only as good as the tuner. If you buy a Pfc, then ask a Wolf tuner to tune it, he may do an "ok" job, but he wouldn't know all the "in's and outs" to make it a great tune and extract the engine's true potential (and vis-versa; if you were to by a wolf and get a pfc tuner to tune it).

if you dont touch injectors and not a huge turbo (or just use a r33 turbo... will make 260-280rwhp)

you can use a safc?

yeah im thinking of getting a garrett GT2860RS im not sure if that would be too big for the safc

yeah im thinking of getting a garrett GT2860RS im not sure if that would be too big for the safc

safc is only good for getting the best out of a lightly modded car. the EMU would be up to the job, but, like has been already said, find a tuner you happy with, look at the ecu's they can tune and go from there.

Also depends on your budget. Autronic, Motec and Haltec are good ecu's but in the top end of the prices, any possibly overkill for the rb20 (depending on your future plans) PowerFC are still around for the rb20 second hand. Wolf3D's are a good unit and plug in aswell. EMU is one of the cheaper options and can almost do everything a full aftermarket can do. IMO if there is a good remap tuner around your area then that is the way to go.

safc is only good for getting the best out of a lightly modded car. the EMU would be up to the job, but, like has been already said, find a tuner you happy with, look at the ecu's they can tune and go from there.

Also depends on your budget. Autronic, Motec and Haltec are good ecu's but in the top end of the prices, any possibly overkill for the rb20 (depending on your future plans) PowerFC are still around for the rb20 second hand. Wolf3D's are a good unit and plug in aswell. EMU is one of the cheaper options and can almost do everything a full aftermarket can do. IMO if there is a good remap tuner around your area then that is the way to go.

thanks for all the info guys ill look into a few tuners and see what they specialise in and go from there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...