Jump to content
SAU Community

Recommended Posts

post-24243-1198121842_thumb.jpg

Standard gtr wing

Blue - few bumps and scratches - suit repainting

$150

2391_1.JPG

1 set of stock R32 GTR 16" Forged Rims

No Tyres

$750 ono + Freight

16fe_1.JPG

1 set of BBS RK 18 inch Rims 5 x 120 PCD -

have a bit of guttering / scratches.

With Hub adators to suit GTR

No Tyres

$1150 + freight

($900 without adaptors - will fit BMW)

post-24243-1197887771_thumb.jpgpost-24243-1197887788_thumb.jpg[

4 x Silverstone FTZ Sport Tyres

(2 x 70% , 2 not Roadworthy)

$200 the lot

PM or Email [email protected]

:P

Edited by Antimatter

hey

Thanks so much for your input guys. Yes the 16 inch rims have some minimal gutter marks (nothing severe at all) I am happy to take some higher res images and email them to people who may be serious about buying them.

With regard to 400... hmm Nope. I'll hang on to them for that. But thanks all the same!

Bottom left one appears to have gutter scrapes on the bottom right hand corner of the rim

they are 18x8.5 - with the hub adaptors they work out to be +3 offset

This sits the face of the wheel in roughly the same position as it would if they were 18 x 9.5 +15 (nismo fitment for R33 an 34)

work fine as a street wheel - but probabley not the right wheel to try an squeeze 275 Track tyres on.....

(235 to 255's go on easy though - I might try a 265 on them next week if I have a chance)

what width and offset are the BBS wheels?
they are 18x8.5 - with the hub adaptors they work out to be +3 offset

This sits the face of the wheel in roughly the same position as it would if they were 18 x 9.5 +15 (nismo fitment for R33 an 34)

work fine as a street wheel - but probabley not the right wheel to try an squeeze 275 Track tyres on.....

(235 to 255's go on easy though - I might try a 265 on them next week if I have a chance)

And without the hub adapter? Im looking at them for a Stagea, which is similar to a GTST offset

Cheers

Tha hub adaptors also change the PCD so it will fit the a GTR (the wheels are BMW PCD) - so probably no good on your Stagea. Sorry.

And without the hub adapter? Im looking at them for a Stagea, which is similar to a GTST offset

Cheers

Edited by Antimatter

Honestly - I have had that many lowballers on those rims. I threw them up on ebay as the had free listings for a few days (and didnt pay much attention to the price.... oops) - and with ebay there is no negotiation anyway. I will consider a serious and realistic offer ;)

Cheers

Honestly - I have had that many lowballers on those rims. I threw them up on ebay as the had free listings for a few days (and didnt pay much attention to the price.... oops) - and with ebay there is no negotiation anyway. I will consider a serious and realistic offer ;)

Cheers

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...