Jump to content
SAU Community

Recommended Posts

Hey peoples,

Been thinking bout it for a while now, and just wondered how many people have actually realised how many imports have had hte km's wound back on them. It becomes obvious when you have a fair few mates who all have R33's like me i kno 5 of us not including me, and i have the newest being a 95, yet i have the most km's at 81,000 and also paid the most for the car itself out of us. A mate i kno has a early 93 model with like 55,000km's and he denies any possibility at the fact it has definately been wound back. He, like all of them are experience problems like cam belts worn, and suspension getting lose and squeaky etc. stuff you expect to see at 100K+ and so on and they stillw ont admit it has been turned back. Yet mw with the msot km's on a car which i hand picked for this specific reason from japan on the auctions, and have had no problems at all... it just shows that when it comes to imports be careful when you go for lower km's cos it usually means not good. Its an easy seller to wind the km's back as it adds value instantly, and also danger. But it just gets me cut at how many you can so obviously tell have been wound back yet sold at prices for one's with those genuine km's and people believe it... i guess it helps to know what signs to look for when buying, but alot of people are being fooled!!

Link to comment
https://www.sau.com.au/forums/topic/19717-import-km-readings/
Share on other sites

problem with most aussies is they place a large empahsis on km's... where it should be on condition. I know of plenty of non imports that are sold with wound back kilometers. We had a car in at work with 120+k and found the service book under the back seat... it had done 120k ... 4 years ago!

Yeah its dodgy as i swear... the thing is it isn't us who wind them back, they do it before the auctions in japan to reach higher prices from overseas buyers who don't see the cars. It happens a lot and i urge people liek you do to buy on condition not km's, cos you find out very quick if its done the km's or not anyway trust me.

I am yet to find one that has not been wound back including my own. I think more often than not they have just taken the 1 off the front of them. Where do people think these cars have been? In a garage for ten years with the suspension being bounced all day long. There is a reason these cars are cheap. You have to take a risk with them.

Mick.

I was just at a car yard in Melbourne that specialises in imports this morning. All the skylines were 70-90kms, half of them had the sticker on the cam belt cover that says that the timing belt had been changed in japan at 100kms. Hmmm. And worse still, i could tell that those without the stickers had had them taken off - u could still c the mark of the outline on the plastic....:D

Yep deifnately easy to show by wear of interior. Mine shocked me when i first saw it as hte back seats had litterally never been sat in as the car was owned by a signle dude in japan my importer knew and was the reason he bought it off him and imported for me cos he knew he looked after it. The dash, gearboot etc are all perfect. I guess i was lucky but it pays to take ya time. And just cos thye are all fairly cheap now doesn't mena they are stuffed, as japan has no option but to offload them and the cheaper they are the more they move. Quiet smart actually cos it plays a big part in the aftermarket parts scene as people can afford to buy the car with leftovers to mod whereas in aus trying to buy a stock rexy form say 96/7 is still around double th eprice of most imported cars that are popular :-/

Guest dori

my mate had a 96 series2 r33, it was immaculate in and out. bought it locally, 2nd aussie owner. it showed 11.000km on the clock, car was stock and a week after he bought it the clutch died completely. later on we saw his exact car on an import site, it was his exact car cause the photos were also taken in perth before he bought it... it said 45,000km lol :P

my mate has a 95 with 100,000km on it, and my other mate had a 95 with 63,000km on it. the 100,000km's car interior showed way less wear, could have given it the '55,000' km wind back if they wanted to.

Looking at interior wear is the key, mine had 77000kms (pretty sure its genuine or at least very close) when i bought it and the interior is near perfect. Sure the handbrake boot is a bit buggered but the car shows other signs of sun damage form sitting in the sun too long, not from long km's like the rear window rubber has shrunk a bit etc. You need to know what to look for the km's it says is pretty irrelevant when buying a jap import

isnt it funny how the majority of imports (93-95) that come in are around 60-65ks from import yards?? every ad that i have seen i can pretty much guess striaght away how many k's the cars done before even scrolling down to read it....65-70ks i got mine 3yrs back (95) with 63k's on it which i thought was pretty high at the time but genuine. importer told me it was owned by a businessman who smokes and had a habbit of pickin at his steering wheel at the lights....haha. when it landed i couldnt believe how clean the interior was...good as new with the odd ciggy burn here and there that was expected. glad i got my hands on a good one.

Look at the clock, then look at the condition of the car. If they don't match, then it's been wound back.

I got mine with "42,000" km on the clock... For a '95 car in January this year.. Yeah, right. I've added 11,000 on it in 6 months. But the car's in pristine nick. If the owner has wound it back, then he has also taken real good care of the car :D

Ultimately the odometer is perhaps one of the most unreliable ways to judge the condition of a japanese import.

As mentioned before by some guys, interior condition is a much better guage. More importantly, it highlights the fact that the owner in japan has taken care of the car, regardless of how far the car has travelled.

IMHO the best way to guage the mileage on the car is the sheer age of the car- Think about it, unless its a gtr, the car is most likely to have been the owners primary mode of transport. (Even then a GTR could be primary mode of transport)

An average daily driver does abt 15-25 thousand kms a year.

If you have a 95 gtst that claims to have 80000 on the clock, it works out to be 10000km a year. Which is rather low for a daily driver.

Of course there are always exceptions to the case, and there are a few lucky few whose cars have not been wound back.

But think about it:

How many of us put a mere 10000km on our daily driven cars per year?

Whats the likelihood that the car(suppose its a gtst) was a japanese owner's 2nd car during its life in japan?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
    • I don't know what you should expect with an LS, but the oil pressure sounds terrible, sorry. As for the brakes, you can get fade from the pads not just the fluid, although generally that feels like a wooden block not doing anything while fluid feels like an oh shit there is no pedal so you can generally tell. What pads are you running front and rear?
    • Went over my datalogs on a whim and noticed a worrying combination of events. High RPM High Temperature Low Oil Pressure Knock Retard I bought some 10w-60 because I actually think this will be better going forward given track temp is 125C and 10-40 will actually be thinner in those environments. I know I had a leak but it's not entirely sure how much pressure loss can be attributed to that. The knock retard does correlate with all of the above. When it's not present oil pressure is higher. And by 'low' I mean at 6800 RPM the oil pressure was recorded as low as ~35psi pretty constantly. Which is obviously very not good. I'm hoping that thicker oil that ISNT LEAKING will result in a bit more pressure when I need it. Also in the last session I got a very spongy break pedal. I bled the lines as the car is on jack stand right now with the wheels off and I noticed... no air in the lines? Maybe the tiniest bit of tiny frothy bubbles for the first 0.1 seconds of bleeding the whole car? The breaks did come back to me after I backed off (and felt fine driving normally). Doesn't appear to be any leaks anywhere that I can see. Any thoughts on that?
    • Solution, run shitter tyres. Let wheel spin be your weak link 😛
×
×
  • Create New...