Jump to content
SAU Community

Highflowed Rb25/vg30 Bb Turbo

NYTSKY
 Share

Recommended Posts

NYTSKY Grand Master

NYTSKY

Posted
Posted

Hi all,

When i get my car back next month i will be pulling the turbo off and will be sold,along with braided oil and water lines.

I purchased an 0P6 housing and had it matched with my turbo.Then it was highflowed at Precision Turbos.

Highflow consists of machined front and rear housings(maximum)

Garrett Ball bearing cartridge.(will try and find the serial number for the cartridge)

It also comes with braided oil and water lines.

It has only been on the car for roughly 7000kms and is basically brand new.

I made 250.9rwkw at 16psi with this turbo.Has alot more in it and wouldnt be suprised if it would make 270-280 with a bit more boost.

The rear housing cost me $350

Braided lines $200

Highflowing of turbo $1550

Im asking $1650+post firm.

Old turbo off new turbo on.... big power!

NOW WITH FREE SILICONE INLET PIPE(second hand in excellent condition)

Bass Junky type.

Contact by PM.

CHEERS

post-32255-1197418639_thumb.jpg

post-32255-1197418705_thumb.jpg

post-32255-1197418769_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/197284-highflowed-rb25vg30-bb-turbo/
Share on other sites
  • 1 month later...
NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted

OK everyone i have finally got my car back so the turbo will be coming off the car.Those who sent me PMs for the turbo please get in contact with me before it goes to someone else.

NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted
dyno chart?

comes with reciepts/warranty?

direct bolt on for r33 gtst s1?

reason for selling?

Doesnt come with a warranty.But the thing is in great condition,i wouldnt be selling it if it wasnt.

Reason for selling is i have another turbo waiting to go in.And it will bolt on no probs comes with braided lines as described in first post.

stolen_s15 Mentor

stolen_s15

Posted
Posted
is the just a standard r33 highflow? fitted it yet?

Sure is mate. Would have loved to buy NYTSKY's turbo its a very well spec'd hiflow but mine was too much of a good deal to pass up.

Its getting tuned today, I'll post up the results tonight after I've taken it for a drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...