Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

it would also be interesting seeing how they ran the exhaust, considering its normally on the other side. Especially with the driveshaft going to the trasfer case, i wouldnt think that would leave much room for a nice flowing exhaust

*edit* just watched the video, its got some big bends putting it back on the "right" side

Edited by R34GTFOUR
i doubt gtr boxes of any sort would last long behind a 7L motor lol

well i never said i had the details worked out perfectly. there would be a lot of issues, but damn it would be fun. even better when you chuck a set of turbo's on it. room might become an issue though

well i never said i had the details worked out perfectly. there would be a lot of issues, but damn it would be fun. even better when you chuck a set of turbo's on it. room might become an issue though

dont worry ive had the idea of a ls2 in my 4wd stagea for a long time but the gearbox is the main issue as it wont last with the torque of the motor, might be ok stock but with mods its not gonna survive.

Dumb, very dumb. BBQ'd brake master cylinder, clutch master cylinder and slave cylinder, not to mention an overheated transfer case with any decent use. Basically flawed thinking with no real advantage.

Cheers

Gary

  • 3 weeks later...

i guess it was the old "lets do something no-one else has done"

for the same money time and heartache think of the sweet setup the could be pushing out of the RB???

it is odd how nissan japan never sized up to toyota and stroked RB a rb30e has a 6500 rpm redline i am sure with the minor changes to the motor they could have done the RB30DETT put it in a SPEC series car sold it for a bit more

It has actually been done and the work was performed last year in Bangkok by a well known local tuner named OTTO SHOP.

This modification is not for the first timer as a lot of work needs to be done to make it all work well. Engine swops are big business here in Bangkok but a modification like this involves much more work compared to a standard engine swop.

Much aluminum welding to the gearbox has to be done to get the gearbox fit the 2JZ. Exhaust also comes down on the other side of a JZ engine and needs to find a new way under the Skyline without overheating the clutch. Other things must also be customized but the gearbox modification will be the big thing.

The reason for them doing this modification was simple. To buy a second hand RB26 engine is much more expensive than a 2JZ as the 2JZ is not only found in the Supra but also in more common models and therefore more available as second hand.

The OTTO SHOP also wanted to exeperiance their work with a modification like this. These guys are good and know very well what they are doing. They have built numorous performance cars and engines in Thailand.

In Bangkok there is also a huge number of very skillfull aluminum welders so in many ways this was a great mod for them.

3:50 into the first video and you can see some of the welding and cutting that has been done to the gearbox. SORRY BUT YOU TUBE DOES NOT ACCEPT THIS FILE OF 141 MB. WILL TRY TO FIND A SOLUTION FOR POSTING IT LATER.

The car has a OS 6-speed sequential gearbox and in this video you can see it accelerating 2 times through 1st to 5th gear on one of Bangkoks highway`s.

The video is from a VCD which came with the magazine and I dont know how to extract the file from it. Thats why its shot from my TV screen.

The text in the magazine and the video is both in Thai.

Hope you enjoy it.

http://www.gtr.co.uk/forum/upload/87646-r3...l?highlight=2jz

Video: http://www.scmotorsports.ca/public/media/CIMG0274.AVI

Edited by MintR33
  • 2 weeks later...

well thats definately different. good on them for breaking the mould. but i think i only would have done it if i was converting to LHD then u wouldnt kill clutch, brake, etc.

EDIT: come to think of it, i remember hearing something about some1 in Aus or NZ that put a 7M GTE in a R32 GTR

Edited by Raysboostin
well thats definately different. good on them for breaking the mould. but i think i only would have done it if i was converting to LHD then u wouldnt kill clutch, brake, etc.

EDIT: come to think of it, i remember hearing something about some1 in Aus or NZ that put a 7M GTE in a R32 GTR

it was in Aus and it was actually a r32 gtst with a 7m, ran 9s on its first night at the drags (built by Rigoli from memory), the 7m is now in a datsun 1200 i think

I caught up with an old friend over xmas that had spent his spare time squeezing a twin turbo supra engine into a 3rd gen Celica, don't know what was funnier? The fact that it looked like it 'belonged' there and was quite well done, fully engineered job, or imagining the looks on some rural V8's getting owned (...by that I mean, "horribly raped") by some ugly as a dogs bum, kind-of-red, stock-shitter 1980's hairdressers car. :D

I caught up with an old friend over xmas that had spent his spare time squeezing a twin turbo supra engine into a 3rd gen Celica, don't know what was funnier? The fact that it looked like it 'belonged' there and was quite well done, fully engineered job, or imagining the looks on some rural V8's getting owned (...by that I mean, "horribly raped") by some ugly as a dogs bum, kind-of-red, stock-shitter 1980's hairdressers car. :D

That's awful. One of if not the greatest Japanese engines pre R35 in one of their worst cars.

WHY?!

just like dr evil said to the mole with the mole "ABOOOOAAAAAHHHH" as in= this is just not right. i love 2jz's and rb26's but each to their own.... why not make a supra 4wd ????? why the hell put a 2jz in a gtr it doesnt need it..!?!?!?!

sure there is a big drive to do something unique in the world of motor sport but this just seems like a waist of time and money(as stated before yest brake cylender/clutch slave and master would get too hot cos of turbo on the wrong side!)

yay for being different but nay for one big f**k up!

rb26dett is the only engine that belongs in r32/33/34 unless it has a 30 bottom end.... that still makes more sence than a 2jz!

just my 2c worth

woulndt be too big of an issue with heating the brake master etc if you do it right, look at how many supras are out there, how often do you hear about them having brake issues due to heat?

  • 2 weeks later...
it was in Aus and it was actually a r32 gtst with a 7m, ran 9s on its first night at the drags (built by Rigoli from memory), the 7m is now in a datsun 1200 i think

wow a 7m in a 1200 id like to see that!! must be a neat fit!

i love 2jz's and rb26's but each to their own.... why not make a supra 4wd ????? why the hell put a 2jz in a gtr it doesnt need it..!?!?!?!

engine conversion is slightly easier than chassis redesign/modification. plus, the GTR is already very well set up chassis and 4wd system. putting a new engine in it will give it more/nicer power to use, putting 4wd in a supra you will have to not only fit it all, but the chassis isnt considered to be as good for handling,, and then you'd still have to tweak the 4wd system too

and for person above, it was indeed a GTS, not GTR

Edited by VB-

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...