Jump to content
SAU Community

Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

^^ Nah he's serious, have a read of his other threads. *shakes head*

Thien, you cant get the sound of venting to atmosphere without the problems that come along with it, unless you change over to an ecu that does not use an AFM.

Thanks mate... and yeah, I'm not too technically-minded when it comes to all this stuff... silly me...

I guess, I'll have to live with it then.... either lose the sound or have the sound with stalling issues.

Thanks mate.

Would a 50/50 plumb back BOV work?

if you really want the psssht, try full atmo on a hybrid type bov. if it gives you trouble in full atmo (which plenty of skylines run without issue) then go 50/50. you should be fine. if that fails, you can always set it up as fully plumbed.

for the guy that asked earlier how its done:

fully plumbed = block one side, attached other to recirc hose.

50/50 = trumpet on one side, other side to recirc hose.

fully atmo = block recirc, use 1 or 2 trumpets on bov

here's mine 50/50

post-29392-1197881136_thumb.jpg

fully plumbed back, as it is now, . the trumpet is replaced with a supplied cap from GFB

post-29392-1197881169_thumb.jpg

btw, if it didnt come with the car, i highly doubt i would've needed or bought it.

Edited by Munkyb0y
if you really want the psssht, try full atmo on a hybrid type bov. if it gives you trouble in full atmo (which plenty of skylines run without issue) then go 50/50. you should be fine. if that fails, you can always set it up as fully plumbed.

for the guy that asked earlier how its done:

fully plumbed = block one side, attached other to recirc hose.

50/50 = trumpet on one side, other side to recirc hose.

fully atmo = block recirc, use 1 or 2 trumpets on bov

here's mine 50/50

post-29392-1197881136_thumb.jpg

fully plumbed back, as it is now, . the trumpet is replaced with a supplied cap from GFB

post-29392-1197881169_thumb.jpg

btw, if it didnt come with the car, i highly doubt i would've needed or bought it.

Is it just me, is does it seem that most people don't give two hoots about BOV's... and don't car about the ssshhtttt sound... would it be fair to say that everyone is over this?

Or is it due to stalling issues which is common in R33's?

where can you get that done? whats is actually changed?

It's dodgey mate.

you take your stock bov off.

and put it in a VISE.

then crush it a little.

this preloads the spring that is in it which makes it hold more pressure as it takes more pressure to push the spring.

it doesn't actually make any more sound though.

Is it just me, is does it seem that most people don't give two hoots about BOV's... and don't car about the ssshhtttt sound... would it be fair to say that everyone is over this?

Or is it due to stalling issues which is common in R33's?

Yes that is correct.

we give no shit for bov sound.

put the stocker on there and stop talking about it.

its true

i also give very little shit for the sound, so i ordered the cap from gfb to block the fuccker off.

i remember driving a 300zx with twin super dooper trumpet ultra mega farkoff bovs. i was over it in 20 mins. i mean even at 2k it was going AAAAAPPSHCOOOO. enough already, i just wanna drive.

Mate, have a think about what youre asking.

Why would you want to modify your car in a way where the *only* benefit will be more noise (which will in turn give you more attention from police), and the downside to it is that it can and almost always will make your car run worse? (In the case of vehicles running airflow metres)

Your stock one does its job, which is to prolong turbocharger life, not make noise.

Dont but an atmospheric one, its pure wank and a waste of money.

DONT PUT THE STOCKER BACK ON MAN.

buy an AEM quality plumb back bov. stockers are shit. they leak and fail to seal. think about it.

what would u do if u were pushed up and down BILLIONS of simes :S

Thanks mate... and yeah, I'm not too technically-minded when it comes to all this stuff... silly me...

I guess, I'll have to live with it then.... either lose the sound or have the sound with stalling issues.

Thanks mate.

Would a 50/50 plumb back BOV work?

No it will not work.

Your AFM measures how much air is going into the engine, the ecu then uses that measuement of air going in to work out hom much fuel put in.

When you put on a BOV that vents air back to atmosphere (makes thats loud pschhh) your computer (thinking the air is still in the engine) puts in way too much fuel. This results in stalling, stuttering, big black exhaust smoke and a generally shithouse driving experience.

A 50/50 BOV still dumps 50% of the air that the ecu expects, so it still causes a problem. Just leave it stock FFS!

*On a side note I changed my spark plugs on the weekend and forgot to put the BOV return pipe back on, as i changed gears i got the atmo bov noise. But it made the car feel so sluggish on gear changes, spat so much black smoke I cant imagine how anyone could deal with that just for a little ghey sound*

DONT PUT THE STOCKER BACK ON MAN.

buy an AEM quality plumb back bov. stockers are shit. they leak and fail to seal. think about it.

what would u do if u were pushed up and down BILLIONS of simes :S

This is twice I've seen you post this bad advice.

what is AEM?

stock bovs are rubbish, leaking heaps of shit, done a trip 2 brissy other weekend, running stock bov, f**kin heap of shit leaking the whole time on light throttle could hear it just in vacum, so fkn annoying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...