Jump to content
SAU Community

Recommended Posts

hmmmmmmm... just thinking y u would think a piece of machinery that has been moving up and down billions of times could never break down, loose its seal...

I would guess that for a given motor, the pistons in the motor would have gone up and down a couple of thousand times more than the piston in the BOV, i know what i would expect to leak first.

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

That information is WAY off..

god there are some dumbshits on here

ok here i go

stock r33 bov which is NOT PLUMBED back so its running into the atmosphere ok

car runs on map sensor and i dont have all the stock plumbed back piping shit so i ran it atmosphere

bov leaks like a heap of shit,must i explain myself any fkn further or are u just another keyboard warrior wanker on here who pays every other c**t to do shit on there car?

thanx good day

god there are some dumbshits on here

ok here i go

stock r33 bov which is NOT PLUMBED back so its running into the atmosphere ok

car runs on map sensor and i dont have all the stock plumbed back piping shit so i ran it atmosphere

bov leaks like a heap of shit,must i explain myself any fkn further or are u just another keyboard warrior wanker on here who pays every other c**t to do shit on there car?

thanx good day

Ok, first i'll quote your initial post.

stock bovs are rubbish, leaking heaps of shit, done a trip 2 brissy other weekend, running stock bov, f**kin heap of shit leaking the whole time on light throttle could hear it just in vacum, so fkn annoying

Now for Abu's post in reply to yours.

That information is WAY off..

Now again yours in reply to Abu.

god there are some dumbshits on here

ok here i go

stock r33 bov which is NOT PLUMBED back so its running into the atmosphere ok

car runs on map sensor and i dont have all the stock plumbed back piping shit so i ran it atmosphere

bov leaks like a heap of shit,must i explain myself any fkn further or are u just another keyboard warrior wanker on here who pays every other c**t to do shit on there car?

thanx good day

Now I have much respect for you and this will not change my views on you. Same goes to abu, I feel he is a much respected member on this forum and he provides very usefull info and so do you also.

Now you've left out a very important piece of info in you first post and I have highlighted that above. Any person reading your initial post is not going to assume that you ran your stock bov to the atmosphere....thus in your view putting it in the piece of crap catagory.

As others have experienced, the stock bov is not crap if it is used as it was intended to be used, as a recirculating valve. Abu's reply was not out of line.

In fact it was your post that was mis-informing by leaving out a critical part of information.

Explanation and informaton is the key my friend.

So it turns out that it is not abu, but you that is the keyboard warrior today. Maybe your just having an off day, but regardless, the name throwing and "going off" at abu wasn't necessary.

I intend no offence to you by this post.

Thankyou for your time.

Edited by KeyMaker

Fellas, I think we've just gone a bit over board... back on topic...

I need an atmospheric BOV to not stall my car - how to do this?

I need the sucking and shshttt sound... man, I need it bad.

No it will not work.

Your AFM measures how much air is going into the engine, the ecu then uses that measuement of air going in to work out hom much fuel put in.

When you put on a BOV that vents air back to atmosphere (makes thats loud pschhh) your computer (thinking the air is still in the engine) puts in way too much fuel. This results in stalling, stuttering, big black exhaust smoke and a generally shithouse driving experience.

A 50/50 BOV still dumps 50% of the air that the ecu expects, so it still causes a problem. Just leave it stock FFS!

*On a side note I changed my spark plugs on the weekend and forgot to put the BOV return pipe back on, as i changed gears i got the atmo bov noise. But it made the car feel so sluggish on gear changes, spat so much black smoke I cant imagine how anyone could deal with that just for a little ghey sound*

Yeah mate, thanks so much for your advice... it is much appreciated....

You ironed it out nicely - enough said, I concur with your point (and those others have made too)...

That's right fellas... stock then it works and runs better but no sound... atmo BOV and the car runs lean, stalls like shit and performs less efficiently.... ok, I'll go stock... thanks.

Fellas, I think we've just gone a bit over board... back on topic...

I need an atmospheric BOV to not stall my car - how to do this?

I need the sucking and shshttt sound... man, I need it bad.

have you been reading??

the GFB Stealth-fx does what you want.......................

have you been reading??

the GFB Stealth-fx does what you want.......................

Apparently it doesn't... as it's only 50 50 plumb back... if I plumb it all back then same thing as stock.

Thanks.

Apparently it doesn't... as it's only 50 50 plumb back... if I plumb it all back then same thing as stock.

Thanks.

No its not, you can adjust it to fully plumb back or fully atmo, or any config in between. The whole idea of this BOV is so you adjust the volume of the noise you want, i have this on my car and if you set it up right the car doesn't stall on full atmo. I live in NSW and unfortunately it is a defect here, Although i had mine adjust to full plumb back the cop said i could adjust it at any time so defect time. And i too got sick of the noise thats why i had it full PB. I don't know about the laws in VIC.

No its not, you can adjust it to fully plumb back or fully atmo, or any config in between. The whole idea of this BOV is so you adjust the volume of the noise you want, i have this on my car and if you set it up right the car doesn't stall on full atmo. I live in NSW and unfortunately it is a defect here, Although i had mine adjust to full plumb back the cop said i could adjust it at any time so defect time. And i too got sick of the noise thats why i had it full PB. I don't know about the laws in VIC.

Full atmo on your bov is just like full atmo on any other bov mate.

PLEASE LOCK THIS THREAD. I cant take it anymore!!!

stolen s15 could you please explain what you mean?

I think you taken my reply the wrong way, i was reply to his post stating that the GFB FX was a 50/50 BOV i was only trying to clear this up by saying it could 100% atmo, 100% plump or anything in beween. I too have gone back to stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...