Jump to content
SAU Community

Recommended Posts

hi guys,

my brains being doing some fothat thinking stuff over the l;ast few days (wife is now complaining of a burning smell in house)

i know that an intercooler on a turbo car serves a perpose inthat it cools the air charge that has been heated by the compression of the turbo....

BUT...

would a small intercooler on an NA be beneficial? as the colder the air inthe more power we get potentially. but eventually there would come a point where the restriction in air flow negates any benefits in cooling the air charge? so where might this occur? is it just pointless puting an intercooler on or would it actually do something?

thoughts and suggestions please.... not sure if this is a stupid idea or not......and no one over this side of the pond to ask ....

Link to comment
https://www.sau.com.au/forums/topic/197926-intercooler-theory/
Share on other sites

an intercooler on a NA will make it lose power, as the temp it would cool it to is the same as it was when it entered, although if you had the cooler as a front mount it would actually soak in a touch of heat from the radiator while you are sitting in traffic so it could heat the air up.

basically all it would do is add restriction.

the reason they work on a turbo car is that the act of compressing air heats it up, plus the heat radiationg through the turbo heats it up a bit too. so the air coming out of the turbo is up close to 100 degrees at times.

yeah it would restrict the flow as the air have further to travel (Depending on intercooler set up) if anything on an N/A possibly heat wrap the induction pipe? stop it heating up from surrounding systems in the engine bay. just my 2 bobs..

hame

Yeah only good for forced induction, If you also built a ramflow or fan to draw the air through the system it would be a benefit, but that kind of setup would still work better without the ic restricting flow.

Fresh air will always be cooler than anything that goes through an ic. Unless ofcourse it's a dry ice setup obviously.

Edited by madbung

look in the sticky of how to get power out on an N/A there is good info in there, let go of the idea about running an intercooler on a n/a it a good thought but there is better mods out there for you hesh!

IT WILL SLOW UR CARR MAN, lol i tried it at the drags one time as i turboed my na but before i did i mounted the intercooler as trial fit then i was going to heathcote so i figured y not, and yeh i lost a sec and a half on time slips with it on, wont help any, done and dusted

cheers guys i guess thats a definitive no then1lol

i was kinda leaning that way but like i say you ask a question like that over here and ya get "why dont you have a turbo ....etc etc ..." so thanks again . the Intercooler idea has left the building.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...