Jump to content
SAU Community

Recommended Posts

You would need to speak to unique1 about the finer details of the differences, but I can defininately say that after having to replace my front driveshaft, there are a LOT of differences between the GTR and stagea attessa systems. I have never directly compared the clutch p[acks from a gtr to that of a stagea, but I think that looking at the rest of the main components (driveshaft, diffs, rear cradles etc etc etc) I can't see Nissan using the same transfer case internals. Why would you bother upgrading the capacity of the diff's, and then not upgrading the system that delivers power to it?

I am not saying that the atessa system will be the weak point in the case of power upgrades (that honour would have to go to the auto) but I just don't think I would place that much faith in it.

As for the Autech, I had always just assumed that due to using the GTR gearbox, the GTR transfer would have come along for the ride as well.

.....I am not saying that the atessa system will be the weak point in the case of power upgrades (that honour would have to go to the auto) but I just don't think I would place that much faith in it.

....

disagreement !!!! the auto box is VERY strong

capable of living with 300rwkw, daily, for over a year, as proved by a couple of members

the auto box should never be underestimated, they are as strong as an Ox

;)

Having 4wd turned on makes a different off the line, it is definetly noticeable.

Not a huge difference but you can feel it, then sensation i can describe is it

feels like the car is more spritely, or lighter taking off.

I would hazard a guess that because the power to the wheels is distributed evenly and

with equally distributed driving force/torque, this will make it easier to shift the heavy

unit that is the Stagea.

As opposed to 2wd where the the load and driving force is at 2 points therefore will require more

force to move off at the same speed. You also notice the rear of your car squats a little as the

suspension and driveline takes up the initial torque as the power gets to the rear wheels.

ie. to use an analogy imagine two people pushing the car along from the rear, then adding two people

to push/pull at the front, heck of a lot easier.

I've found that when the car is loaded up a bit, using the 's' button seems to make it drive easier...but I never tried that for very long (and obviously wouldnt' recommend it for a long trip).

+1 for the strength of the auto. I believe Nissan is best known for its bullet-proof drivelines and gearboxes. Most Nissan 4WD owners will know that the gearbox and 4WD systems are very good :rofl:

Just to clarify... Pressing that S button. It doesnt activate ATESSA and have constant 4wd. It just just changes it so when the ATESSA IS asked to kick in, it sends equal power to all wheels..

Correct?

Also I've noticed when the S button is on, When I switch the car off, the car will do a subtle lurch forward. Everyone else experience this? (It doesnt happen when S is turned off)

Just to clarify... Pressing that S button. It doesnt activate ATESSA and have constant 4wd. It just just changes it so when the ATESSA IS asked to kick in, it sends equal power to all wheels..

Correct?

Also I've noticed when the S button is on, When I switch the car off, the car will do a subtle lurch forward. Everyone else experience this? (It doesnt happen when S is turned off)

It will drive basically as a 50:50 awd - ie. constant. The only thing to remember is its NOT the same as the constant awd used in most other vehicles (ie. subaru wrx, mitsubishi lancer evo etc). Its just telling the computer to prefer 50:50 torque split instead of 5:95 (F:R). The computer will still override the "preferred" torque split if it feels it needs to, and so even in 50:50 mode if you're cornering fast etc. it may choose to transfer torque to the rears...but as the g-forces decrease and things return to normal, it will work its way back to 50:50. On the other hand, when the button is OFF, it prefers 5:95, and will transfer torque to the front as needed, but take the pressure off and it will work its way back to 5:95.

Clear as mud?

hehe thanks. so its constant. Clear

What does it mean when the "4WD" light comes on thats next to the "S" Light?

This light will light up when you first turn the car on and then turn off a second later. This is normal.

But if it turns on later or stays on while you are driving etc. it may mean you have a faulty sensor or blown fuse (hopefully) or issues with the AWD system (called ATTESA - Advanced Total Traction Electronic System for All). People who disconnect the front drive shaft and take out the fuse will have the light on all the time. Pretty sure its the fuse that would do it - best to check it out straight away because the system isn't designed to run like this for too long. Puts strain on the clutch packs etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...