Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Well i did what u said , googled drift wing, and found this picture.

http://www.spoilershop.com.au/images/acc/s...rift%20wing.jpg

As you can see, picture is called "Nissan skyline rear drift wing".

Yes well done, what about the other 15 pictures that came up? Were they all the same?

personally i think on a 33 it looks a lil funny, and the 32. but i think the 34s look awsome with a wing.

i got one on my car and i am pretty sure it looks bad asssss.... it looks funny if you have a lamo stock car and a spoiler but if you have a kitted out car with wheels it really adds to the look

onemorefu6.jpg

and if you think that looks shitty then you need your eyes checked

I think the drift wing aka little duckie wing looks ok if you want to achieve a family, sedan look ... e.g. like a Honda Accord Euro - but if you want a sports car look, I would not suggest it... however, like a few people have said - some people get the drift wing to fill up the steeping gap in the boot to level it with the quarter panel - which is fair enough.

If you're really against the GTR wing... what you can do is this... get the D-wing to level up the boot ec; then chuck a GT Wing like the picture above or whatever you like just behind it... this way, your boot is filled up and you don't have a normal (everyone's got) GTR wing look.

Alternatively, as suggested before - get yourself a full boot replacement so that it looks all filled up.

Up to you mate - beauty is at the eyes of the beholder.

Edited by Spunky Munky
i got one on my car and i am pretty sure it looks bad asssss.... it looks funny if you have a lamo stock car and a spoiler but if you have a kitted out car with wheels it really adds to the look

onemorefu6.jpg

and if you think that looks shitty then you need your eyes checked

Probably one of the neated, tough-looking and clean R32's I've seen in a while - can't say anything about that.

However, the metal GT wing has to go in my opinion - doesnt suit the car... would go for a wingless look instead as with R32's, wings have never been there thing imo.

yeah we aren't allowed 33's in canada yet so i can't tell you what to do on a 33..... i am not a huge fan of GTR spoilers i think they look outdated and suit the car at the time it was made..... it also depends on how extreme of a look you are going for? i don't understand why you don't post a pic of your car first and then we can see what we are working with

like i said if you have stock everything a massive spoiler will look rediculously out of place

8sharp900.jpg

TSAero33.jpg

mostly i see these kind of spoilers on the 33

Damn,, the black R33 from JDL Tuning looks hot as... gotta say, this guy knows a thing or two about cosmetics - he/she should be a Revlon chick... lol

Damn, by adding the little hood-wing thing on the back window it blends well with the d-wing and looks flush at... not to mention the veilside backbar... nice... but like I said earlier... this look makes it look Elegant and family-car style - not a Sports and tough look....

Up to you on what style you want to achieve....

what rear bar are you going to use?

Havnt really thought bout that yet, moneys abit of a problem atm, got pulled over for speeding plus rego is due in bout 2 weeks lol.

But if i was to choose one off the top of my head, i would like this one

post-37614-1198385554_thumb.jpg

Nice and simple i guess

This one also looks phat, its from freddy at topstage.

post-37614-1198385728_thumb.jpg

I think the drift wing aka little duckie wing looks ok if you want to achieve a family, sedan look ... e.g. like a Honda Accord Euro - but if you want a sports car look, I would not suggest it... however, like a few people have said - some people get the drift wing to fill up the steeping gap in the boot to level it with the quarter panel - which is fair enough.

If you're really against the GTR wing... what you can do is this... get the D-wing to level up the boot ec; then chuck a GT Wing like the picture above or whatever you like just behind it... this way, your boot is filled up and you don't have a normal (everyone's got) GTR wing look.

Alternatively, as suggested before - get yourself a full boot replacement so that it looks all filled up.

Up to you mate - beauty is at the eyes of the beholder.

Yer thats what i would really be aiming to acheive, a nice simple look, with the boot flush. Besides, gettin a full blown sports look isnt a good idea where i live, the cops are real hard c**ts when it comes 2 skylines.

But yer, fanx 4 the suggestions.

yeah we aren't allowed 33's in canada yet so i can't tell you what to do on a 33..... i am not a huge fan of GTR spoilers i think they look outdated and suit the car at the time it was made..... it also depends on how extreme of a look you are going for? i don't understand why you don't post a pic of your car first and then we can see what we are working with

like i said if you have stock everything a massive spoiler will look rediculously out of place

Yer so-far my car is completly stock in terms of body styling so i dont want to go for anything outrageous.

Heres a few pics of my car, nothing special but it does the job. :banana:

post-37614-1198386464_thumb.jpg

post-37614-1198386360_thumb.jpg

post-37614-1198386296_thumb.jpg

post-37614-1198386197_thumb.jpg

Btw, sorry for not posting pics earlier.

I don't like you :)

:banana:

And for the record, they look great when done right...

img00147ar3.jpg

Hahaha dw i still like you ;)

And sure that wing looks great, never said they didnt.

I just wouldnt prefer them, especially when i dont have a kit.

Is everything cool between us now, lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...