Jump to content
SAU Community

Recommended Posts

I bought these things in mind to do an r34GTR front conversion on a GTT. But I no longer need these anymore as I have just bought an r34 with the conversion luckily already done (the white R34 in the pik below). I spent heaps on the parts (more than I am now asking for them) because they are all original pieces an not fibreglass copies/moulds.

I also have the GTR lip that sits under the front bumper also, PM me for more info on that one.

Here is a pik of the front bumper and bonnet

dd.jpg

12-3.jpg

11-3.jpg

The front bumper is exactly the same one on the white R34 GTT below. This is what u can make ur GTT look like!!:

Gtt-R.jpg

Item:r34 GTR front bumper

Condition: good

Price: $750

Location: Melbourne, western suburbs

Contact: Ferah on: 0431521947 or PM or email me at [email protected]

Comments: Comes with Nismo clear front indicators, which are worth about $120 alone

Item:r34 GTR bonnet

Condition: good

Price: $850

Location: Melbourne, western suburbs

Contact: Ferah on: 0431521947 or PM or email me at [email protected]

Comments: Original GTR bonnet

Item:r34 GTR Right hand side front gaurd

Condition: good

Price: $500

Location: Melbourne, western suburbs

Contact: Ferah on: 0431521947 or PM or email me at [email protected]

Item:R33.4 Uras front fenders

Condition: brand new never been used

Price: $220

Location: Melbourne, western suburbs

Contact: Ferah on: 0431521947 or PM or email me at [email protected]

Comments: They are the white fenders in the pik above

Edited by DNGRUS
Link to comment
https://www.sau.com.au/forums/topic/198659-r34-gtr-stuff-oem-originals/
Share on other sites

so u can just buy the fender,bonnet and front bumper to put it on??? why is the east bear kit so expensive???

im not selling an east bear kit, i was selling the factory original R34 GTR parts

So do you only have the right fender - no left fender?

thats what i said

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...