Jump to content
SAU Community

Recommended Posts

after spending thousands on my car stereo i was driving around yesturday with it up loud (35/40) and it just turned off.

i though it might have been one of the amps over heating but if that was the case then the sub should of still been going?

im hopings its the fuse at the back of my head deck?

both amps (soundstream 4 channel and pioneer mono) are not turning on at all!??

head deck is turning on playing cd's ect but no sound is comming through anywhere?

i have checked the fuses on the car (electric 1 and 2 and car audio).

any help would be great thanks

edit, i posted it here because the car audio section doesnt get as many readers

Edited by thorpe84
Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/
Share on other sites

do you have a fuse between the amps and the battery? check the fuse on the back of the head unit.

also check that your head unit's face is attached properly and you haven't accidentally muted it... yeah I know, stupid idea, but it could happen.

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546794
Share on other sites

yeah there is a big ass fuse between the battery and the amps, it is fine

i have a double din pioneer deck so the face doesnt come off

dont spose anyone would know the type of fuse it would take as i cant find the manual for it, and cbf driving around with my dash all over the place trying to buy the friggin thing, from memory its was a red blade fuse smaller then the ones that are in the car fusebox?

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546806
Share on other sites

Yeah those are the types... I always thought those were for the onboard amplifier though, someone correct me if I am wrong, but I have never actually blown a fuse in the back of a head unit...

Simplify everything, start with step one... Grab some power (with an inline fuse) and a remote wire from the headunit (if you have all external amps, and they won't turn on, it could very well be this) and run new wires to one amp and see if it turns on... If you can't make the amps turn on like that, I would start to worry...

just test stuff one by one...

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546814
Share on other sites

to be honest i have no idea when it comes to electronics, i have paid alot for all this shit to be installed into my car and im not confident enough to start f**king around with all the goodies, i would probly end up frying myself.

i know basic electronics but nothing too crash hot

i was thinking, because both amps arnt working it would have to be a power problem wouldnt it? grounding or something like that

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546847
Share on other sites

That or the remote wire... That tells them to turn on and off, if that got shafted and earthed out, it wouldn't be able to tell them to turn on...

Got any friends that can help you out with checking wires and stuff? You just need to run some extra wires to the amps to see if it is a wire problem... That's step one :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546864
Share on other sites

was justs kimming thorugh the thread, does your head unit still turn on? get a test light or DMM, check for power at the thick power cable on the amp and the remote wire (little one next to power wire) on the amp, if both have power your amp(s) are gone (if the headunit doesnt turn on, there wont be power on the remote line)

the inline fuses may look alright, but make sure your getting power at the other end, same thing happened to a mate, fuse looked brand new, still wasnt passing power though

edit - there will also be a fuse under the dash somewhere (cant remember for R33's specifically) that supplies power to the headunit, try that one first if the unit isnt turning on

Edited by VB-
Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3547116
Share on other sites

The fuses used are pretty beafy, but when they go, the break can be quite small. I had the fuse go on mine, and by looking at it, you couldn't even tell. If you are getting a DMM you can test the fuse with that. Otherwise, I'd recommend buy a fuse and replace the current one. They are only a few dollars, so if it isn't the problem, it hasn't cost you much, but could save you money in the long run.

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3547850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...