Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Heeeeyyy Dats looking flash as eh. How long before you turn the key? So tell me the secret of the shiny rocker cover and don't just say elbow gease. Your secret will be safe with me, just post it here and I promise I won't tell a soul.

The secret of the rocker cover is... er.... ebay usa actually. I polished all the other parts though, like the timing cover and manifold with a wire brush, then sandpaper then autosol.

Have turned the key and the car runs a treat. Once it's run in Ill get a pro to look over it to make sure it's correctly timed and that I haven't misseed anything.

Hey,

These twits stock the pulley,

http://www.thezstore.com/page/TZS/CTGY/PEM06

but good luck with their defective online shopping cart, or getting them to answer emails. I got lucky and found mine on ebay USA for a little less as it turns out :thumbsup:

Word of warning though - these pulleys do not quite fit onto the key on the end of your crank. You'll need to file a smidge off the sides of the key to get the pulley to slide on without breaking the pulley, the crank, the oil slinger etc.]

Cheers, d

I bought my pistons from them. Plus 1.0mm forged flat top Ross Racing Pistons for a tad under $700.00 delivered. Compared to nearly $1600 here in Oz to get them made. Had no hang ups, deal went very smoothly.

Cheers, D

Actually, I have tried ordering from them again. This time I filled out both my mailing details and the billing details (it says that this isn't necessary if they are identical) and the cart was able to process my order. I'm still dirty on them for not replying to my polite email, but there's no denying they have some great stuff for L series engines.

  • 2 months later...

Changed to an electric fan on a thermo switch and tidied the last few things over the weekend. So that wraps up the engine build... until I have enough money for triples, and a stroker crank.

Now... time to paint the body.

post-26626-1224580104_thumb.jpg

post-26626-1224580131_thumb.jpg

post-26626-1224580161_thumb.jpg

post-26626-1224580191_thumb.jpg

That looks great man, very clean and tidy.

Am so tempted to give mine a good tidy up, but my wife will do unspeakable things to me if I head down that road again :P

Quick Q's: Did you make your strut brace, if so where did you get the turn buckle/adjuster from?

Cheers Dan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...