Jump to content
SAU Community

Recommended Posts

hey guys, driving along this afternoon given my 33 a bit of stick hit the limiter in 1st gear changed to 2nd, then wierd noise from blow off valve, then very wierd whining noise coming from turbo, kept reving it in carpark and noise never stopped, boost also dropped to?? had to get towed home dnt wana risk eny more damage, pretty sure turbo f*ked, but the wierd thing is i havent touched boost or enything and engine hasent even seen 100,000 kays yet?? its ok if it is screwed cause upgrading enyways, but wuld still like ur opinions b4 i take it apart. cheers

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/
Share on other sites

plus hgow legit the 100,000 ks is PLUS was it boosted before you bought it? Judging by your nick you have a 33 so more than likely you may have a ceramic wheel which from record doesnt last to long anyone, a good option before you get a GTRS is to perhaps hiflow?

My car is comfortably making 340rwhp on only 15psi, could probably go for 18psi and crack a nice 360rwhp with very minimal lag.

Per4manz in welshpool will do a nice stage 3 rebuild for around 1300- 1400 depending on extent of damage

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3550127
Share on other sites

yer that is tru, my car in very good condition n i think kays are pretty legit but u just never no, but im guna park her up pull the turbo off an wack the gtrs on, i was guna go hiflow but ive had a hiflow b4 and wasnt very responsive, so yer my pride n joy will be out off action for a while. nope car completely stock, all ive done is put a front mount so yer. joel

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3550157
Share on other sites

No turbo timer? Do you thrash the f**k outta it and then turn it off while still hot?

Might be worth doing some reading up on how to look after a turbo car while you get the rebuild to save you from breaking your new setup (or more) :)

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3550843
Share on other sites

Was gonna say that you might have just blown off a sillicone hose. . . but being stock probably not . . unless a clamp wasnt done up tight . . i know when i blew off my hose the turbo has a real high pitch whistle and no boost so i thought i did my turbo too. just have a close look at your piping . . there might be a spilt in the hose or just come off, its worth checking

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3550947
Share on other sites

Was gonna say that you might have just blown off a sillicone hose. . . but being stock probably not . . unless a clamp wasnt done up tight . . i know when i blew off my hose the turbo has a real high pitch whistle and no boost so i thought i did my turbo too. just have a close look at your piping . . there might be a spilt in the hose or just come off, its worth checking

yer thats a good point cheers mate ill take a gud look, cheers

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3551181
Share on other sites

No turbo timer? Do you thrash the f**k outta it and then turn it off while still hot?

Might be worth doing some reading up on how to look after a turbo car while you get the rebuild to save you from breaking your new setup (or more) :banana:

mate i no how to look after a turbo car ok, yes i do hav turbo timer, set to 2 miutes plus sometimes more when i leave it idling, cheers for ur input tho mate

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3551187
Share on other sites

LOL!

limiter doesnt kill turbos....

ask around.... if it did i would of killed my stock turbo when i had it on lol!

hahaha f*kin oath it doesnt!! i think it just decided to let go, oh well its just goin to make the modification process go quicker i need it bak on the road, HKS GT-RS on its way!

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3554270
Share on other sites

The ceramic turbine wheel is the likely culprit, boost the motor to over 10psi and you increase the risk of kissing it good bye.

The only other issue that may occur at the same time is getting a small amount f ceramic dust back into the motor, happens less on the Rb20/25's than the GTR's.

Ok if it's screwed? Maybe, or you might find a rebuild not far away.

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3554339
Share on other sites

i was under the impression that heat is one of the main things that can kill the ceramic exhaust wheel in the stocker, and that being close to or on the limiter wud create more heat then usual and shorten the life of it over time????

please correct me if im wrong im still a newb :banana:

Link to comment
https://www.sau.com.au/forums/topic/198989-blown-turbo/#findComment-3554789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...