Jump to content
SAU Community

Help! Oil Pressure Gauge Issue

kalel

By kalel,
in South Australia

 Share

Recommended Posts

kalel Collaborator

kalel

Posted
Posted

Hey Guys!

This may be a slightly long story, but please read because it may provide some clues.

I was on a cruise and basically I cornered too fast (Stupid I know) and lost control and spun out. I wasn't trying to be a smart arse, just trying to get somewhere in a hurry. I was extrememly lucky in more ways than one. I backed over one of those aluminium white reflector things that are on the side of country roads when I stopped spinning (only did 270deg). I feel like an absolute tool and an idiot for going too fast. I tore loose an Earth wire which in turn blew an ignition fuse. This lead to no dash instrumentation and no power windows and best of all stopped my alternator from charging my battery. Once the fuse was replaced, everything was working again. I have checked underneath the car and can't find any damage from the reflector post other than the obvious wire that was torn loose. This leads me to today.................

When I was going to a mates place I noticed that the oil pressure gauge was getting really high when I was pulling high revs. even around 4g on the rev tacho, it was reaching the line between 4 ang 8 on the gauge. It was almost hitting 8 when I was pulling over 5.5-6 g on the revs. I don't think that this is normal, but I can't verify it as I don't know anyone who has a skyline presently. I can't see any oil leaks and the oil level looks good.

I have a S2 R33 which is stock except for a pod filter.

If anyone has any ideas, please let me know. I will probably have to take in to a mechanic (anyone know anyone around the woodville area?) maybe morepowa or some place like that but at least I will have a possible clue as to what I am looking at.

cheers

Link to comment
https://www.sau.com.au/forums/topic/199094-help-oil-pressure-gauge-issue/
Share on other sites
Cubes Grand Master

Cubes

Posted
Posted

The stock gauges and senders are notoriously inaccurate and can read either extremely low (most common) or in some cases extremely high. Mine does both from time to time.

Get either a cheap mechanical pressure gauge on it to test or shove a decent elec gauge (~$100-150).

Oil pressure too high or too low can indicate engine problems so get it checked out. :banana:

kalel Collaborator

kalel

Posted
  • Author
Posted (edited)
The stock gauges and senders are notoriously inaccurate and can read either extremely low (most common) or in some cases extremely high. Mine does both from time to time.

Get either a cheap mechanical pressure gauge on it to test or shove a decent elec gauge (~$100-150).

Oil pressure too high or too low can indicate engine problems so get it checked out. :blush:

I think from memory that mine stayed relatively constant.

I did notice however it is more exaggerated when the car is cold as opposed to when it gets up to temperature.

any more thoughts?

will be getting it checked out a.s.a.p. though. can't afford a new engine. :banana:

thanks

Edited by kalel
Cubes Grand Master

Cubes

Posted
Posted
It was almost hitting 8 when I was pulling over 5.5-6 g on the revs.

If the motor was cold and your pulling high rev's expect to loose a bottom end in the future.

As a general rule don't give the car a hiding until ~10mins after the water temp has reached normal operating temp as the oil is still cold and thick. Thick oil = less oil flow.

If you loose a bottom end there's a reason for it; either you have given it shiet when its cold, there's been detonation or oil starvation at some point.

  • 3 weeks later...
wildr33gtst Rising Star

wildr33gtst

Posted
Posted

make sure you do i was in the same situation than you with my freshly rebuilt motor, everyone kept telling me its the gauge or sender and i didnt bother checking it out, and then my oil pressure light came on and now my engine is out again, so i would suggest putting a mechanical gauge to it asap, and if it is running low oild pressure it might be time to replace it before it does some serious damage. Well worth it for piece of mind. cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...