Jump to content
SAU Community

Recommended Posts

Hi guys,

i went for a bit of a drive today, while going along a short straight i gave it full boost and POP, off came one of the cooler pipes. i know its best to leave the car idleing roughly as it does, but i could not for the life of me keep the car running no matter how hard i tried :banana:

the turbo is a highflowed journal bearing t3/t4 with a vg30 exhaust housing, it would have only got less than a minutes worth of idle before it stalled completely. my question is could i have damaged the turbo by all this happening??

it took me a minute or 2 before i reconnected the pipe and started it running again, the car runs fine but i havent given it any boost yet because i need a new clamp.

thanks

Sam.

Link to comment
https://www.sau.com.au/forums/topic/199119-cooler-pipe-blown-off/
Share on other sites

Not too sure why you'd want to keep the car running with a popped off cooler pipe. A quick shut down time is going to do less damage than trying to keep the car running with unmetered air entering the engine.

Shouldn't have done any damage though, everyone has it happen to them at some stage and I haven't heard of busted engine or turbo from it.

Not too sure why you'd want to keep the car running with a popped off cooler pipe.

so the oil keeps flowing through the turbo, so it cools off a bit. my tuner instructed me to keep the car running for at least a minute or two if the cooler pipe pops off.

the engines all good, i was just a bit worried about the turbo

so the oil keeps flowing through the turbo, so it cools off a bit. my tuner instructed me to keep the car running for at least a minute or two if the cooler pipe pops off.

the engines all good, i was just a bit worried about the turbo

That was a rhetorical question. I know a hot shut down is not good for a turbo but trying to make your car idle without an afm is worse.

That was a rhetorical question. I know a hot shut down is not good for a turbo but trying to make your car idle without an afm is worse.

yeah no probs mate :thumbsup:

i know what u are saying though, i smoked out everything with unburn fuel while i was trying to keep it running!

im pretty sure everything is ok, ill clamp it all up good tomorrow and see how it goes.

yep thats exactly what happened to me this morning on the way to work, it was nice and cool in the morning so i had it on full boost.

Pop, and i was reving but was not going anywhere. Had to pull over on the freeway. It had me worry because it never happened to me before. Its all fix now so all good. :(

should be fine mate. the reason the car stalled was the afm,s when you blow a pipe of you loose pressure to the engine and the afm,s so it should stall unless you run map sensors, as for the turbo, true standing still after a hot burst is not good but it only does harm when you dont start the car up again for hours,hen the oil has time to harden , you started within minutes, i would not worry mate.be fine..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...