Jump to content
SAU Community

Recommended Posts

Hi,

I'm after some information about what oil filter to use with the hks type r oil cooler kit, which comes with a remote oil filter mount. As the stock oil filter looks to large to screw into the remote mount. also the length of the stock oil filter looks to large, ATM there is some j-spec brand oil filter on it which looks very small in width and length.

any help would be great :)

Cheers Michael

yeah its 442. same thread but smaller (shorter) than the standard one. 442 is a generic part# most places will have one from some brand on the shelf.

http://www.fsafilters.com.au/html/passenger/nissan.html

yeah its 442. same thread but smaller (shorter) than the standard one. 442 is a generic part# most places will have one from some brand on the shelf.

http://www.fsafilters.com.au/html/passenger/nissan.html

so what car is it from? and can i get one from nissan? don't like generic oil filters prefer geniune nissan filter

Edited by [Michael]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...