Jump to content
SAU Community

Recommended Posts

This is just from memory so it could be slightly wrong

push the TV button on the left panel near the bottom

on the screen push the far r/h button to scroll thru something like this

TV(auto) -> TV(manual) -> AV1 -> AV2 -> back to the start

any probs & I'll physically check

good luck!

correct, but AV2(called VTR2 I think) will not display unless something is plugged into it, you will probably need the original factory stereo to get a sound from AV1. Most modern head units have the input plug anyway, with far better sound than the clarion unit, and no need for band expanders.

This is just from memory so it could be slightly wrong

push the TV button on the left panel near the bottom

on the screen push the far r/h button to scroll thru something like this

TV(auto) -> TV(manual) -> AV1 -> AV2 -> back to the start

any probs & I'll physically check

good luck!

Looks good! Thanks!

correct, but AV2(called VTR2 I think) will not display unless something is plugged into it, you will probably need the original factory stereo to get a sound from AV1. Most modern head units have the input plug anyway, with far better sound than the clarion unit, and no need for band expanders.

Errr... Chook, correct me if I am wrong, but do you mean that we can leave original Xanavi Double DIN unit in place , replace only factory radio (strereo) and connect Xanavi Head unit to it ?

  • 1 month later...
Errr... Chook, correct me if I am wrong, but do you mean that we can leave original Xanavi Double DIN unit in place , replace only factory radio (strereo) and connect Xanavi Head unit to it ?

That would be interesting... can that be done?

Do you mean that you want to use the AV inputs on the front of the xanavi and play this through an aftermarket headunit ? if someone could pin-out the right wires on the back it should be possible, as well as play cd's on the xanavi. But considering the low price of quality headunits with front inputs these days, it wouldnt be worth the hassle.

Do you mean that you want to use the AV inputs on the front of the xanavi and play this through an aftermarket headunit ? if someone could pin-out the right wires on the back it should be possible, as well as play cd's on the xanavi. But considering the low price of quality headunits with front inputs these days, it wouldnt be worth the hassle.

That's true. I thought there might be some use to replacing just the single-DIN radio/headunit, but I guess you would then lose the capability to control the 6-stacker in the boot... best then I guess to either do the TV conversion & take advantage of that LCD display (:(http://www.skylinesaustralia.com/forums/St...Tv-t203961.html) or get rid of it altogether.

Edited by DaveB

On a related topic, in researching the connections on the back of the Xanavi centre-console unit itself, someone somewhere posted a pic' of the rear of the centre console Xanavi cluster on here a while back... does anyone have a link to it as I can't find it in a few different searches?

A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

Actually I mainly wanted to know if the brackets for the Xanavi were the same as for the 3-DIN setup with the stand-alone climate control unit or if they were different. These are the brackets I mean (not sure if these are standard or Xanavi):

post-32445-1203184738_thumb.jpg

Actually I mainly wanted to know if the brackets for the Xanavi were the same as for the 3-DIN setup with the stand-alone climate control unit or if they were different. These are the brackets I mean (not sure if these are standard or Xanavi):

post-32445-1203184738_thumb.jpg

brackets are different as the exnavi unit is wider than the stock din size it is ofset to suit the exnavi.the ones u have in pic are 3 din ones.regards mike

brackets are different as the exnavi unit is wider than the stock din size it is ofset to suit the exnavi.the ones u have in pic are 3 din ones.regards mike

thanks Mike :laugh: I think you predicted early on that I'd end up swapping out my Xanavi

A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

Ah, I am afraid, it's time for me to clarify something. What does actually Xanavi unit do ? Or, I think I'd better put it that way, where is the amplifier located (if you can call that thing "an amplifier") ? Does Xanavi have an built-in amplifier or single din stereo does the job ?

Basically, what I want to get, it's quite simple - I want to keep Xanavi unit and use it's LCD screen to play movies, use it for climate control system ,etc, but I also want to swap single-din stereo and put something better instead, probably even MP3/dvd player or just a good single-din stereo. I'd also like to keep existing functionality, as volume control, etc on a steering wheel.

Am I asking too much ? :cheers:

Ah, I am afraid, it's time for me to clarify something. What does actually Xanavi unit do ? Or, I think I'd better put it that way, where is the amplifier located (if you can call that thing "an amplifier") ? Does Xanavi have an built-in amplifier or single din stereo does the job ?

Basically, what I want to get, it's quite simple - I want to keep Xanavi unit and use it's LCD screen to play movies, use it for climate control system ,etc, but I also want to swap single-din stereo and put something better instead, probably even MP3/dvd player or just a good single-din stereo. I'd also like to keep existing functionality, as volume control, etc on a steering wheel.

Am I asking too much ? :cheers:

No amplifier, just a screen, aftermarket single din stereo will be a good upgrade. You will lose the ability to play CD's on the Xanavi and you might lose the functionality of the steering volume unless you are talentled with electronics and can integrate it with your aftermarket one somehow.

No amplifier, just a screen, aftermarket single din stereo will be a good upgrade. You will lose the ability to play CD's on the Xanavi and you might lose the functionality of the steering volume unless you are talentled with electronics and can integrate it with your aftermarket one somehow.

Losing an ability to play CDs on the Xanavi is not a big deal as a single din stereo will do the job, but I'd like to keep functionality on a steering weel. Ahhhrrr :cheers:

Just wonder if anyone managed to connect an aftermarket stereo and keep that functionality at the same time ?

Losing an ability to play CDs on the Xanavi is not a big deal as a single din stereo will do the job, but I'd like to keep functionality on a steering weel. Ahhhrrr :teehee:

Just wonder if anyone managed to connect an aftermarket stereo and keep that functionality at the same time ?

Reference on the ALPINE site. scroll down to ' Steering remote ready ', talks about using the factory steering buttons. http://www.alpine.com.au/support/glossary.asp

Is the head unit clarion ? Could be compatable with an aftermarket Clarion ?

Either way, if you talk to the right car sound people (not JB), it is highly likely you can keep them working.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...