Jump to content
SAU Community

Aircon Regassers In Melbourne That Use Hychill Hr12 Gas


Recommended Posts

not that much work to "convert" to HR12 unless the car has already been converted to R134a. if the car still has the old R12 gas in it, then it just needs to be tested etc. Degassed and regassed with HR12.

Ill have a quick guess at around $300 mark?

Someome correct me if im wrong please

hahah, tow car... you make it sound like something normal! should get the plates, A380 or something - if it's the massive beast i'm thinking of...

did you go with Hychill refill??

Hey,

Haven't seen this before.

I've had my R32 GTR for 5 years now and have never had air con.

It was never gassed since it came over.

Where around croydon or ringwood does this regassing with hychill?

I also have got to get the pulley bearings looked at as they are very noisy.

Any suggestions on where to go?

Hey,

Haven't seen this before.

I've had my R32 GTR for 5 years now and have never had air con.

It was never gassed since it came over.

Where around croydon or ringwood does this regassing with hychill?

I also have got to get the pulley bearings looked at as they are very noisy.

Any suggestions on where to go?

Hey.

The gas were talking bout is known as either Hychill or HR12.

A lot of A/C places will try to talk you out of it cos they dont know much about it themselves or have had too much R134a crap thrown at them to know any better. HR12 is essentially a natural refrigerant replacement for the old R12 systems that we have in R32's.

The HR12 works a lot better then the R134a stuff. Enough for you to cool a can in front of your air vent! it also wont corrode your A/C system like R134a does.

Sorry i dunno any places around your area that knows their stuff. I think my brother mentioned that his mechanic has it. ill find out soon.

Good luck finding a place.

I didnt really get a chance to talk to ya at the midnight cruise apart from trying to figure out where we were!. will hafta talk properly next time.

Hey.

The gas were talking bout is known as either Hychill or HR12.

A lot of A/C places will try to talk you out of it cos they dont know much about it themselves or have had too much R134a crap thrown at them to know any better. HR12 is essentially a natural refrigerant replacement for the old R12 systems that we have in R32's.

The HR12 works a lot better then the R134a stuff. Enough for you to cool a can in front of your air vent! it also wont corrode your A/C system like R134a does.

Sorry i dunno any places around your area that knows their stuff. I think my brother mentioned that his mechanic has it. ill find out soon.

Good luck finding a place.

I didnt really get a chance to talk to ya at the midnight cruise apart from trying to figure out where we were!. will hafta talk properly next time.

Yeah cool, will have to chat next cruise.

If you could find out where a good place is that can do my air con let me know.

I dont mind a drive, if it gets done properly.

Cheers.

hahah, tow car... you make it sound like something normal! should get the plates, A380 or something - if it's the massive beast i'm thinking of...

did you go with Hychill refill??

the two most reputable people is spoke to talked me out of it..... gave me the option but i ended up going R134 :happy:

Stupid A380 needed new hoses, TX valve and receiver drier been open for too long.... i wanted the a/c to be perfect so took to anything that could be suspect... lucky the conversion used xf falcon gear so its only the hoses (20ft of hose :D ) that is dear.

Attached a pic of what it should look like once finished. 10 stud FTW

post-34927-1257941082_thumb.jpg

Edited by URAS

As stated in an earlier post (although in 2008 lol), JNK Auto does HyChill...

I just called them up now and spoke to Tim. What a champ, he spent like 20mins chatting to me about it explaining it all. Good thing was he was honest and said he is still acquiring his licence to do ac gassing and he doesn't personally do it, his boss does (John). Shows to me he's pretty clued up even though he doesn't personally do it.

Anyway, I'm book in for next week. Their contact number is 9873 2622, located in Mitcham.

Cheers,

Andy

Edit: Quoted $132 GST inclusive for the full works (i.e. full flush, lube and dye, and recharge etc.).

Edited by AnDyStYLe
As stated in an earlier post (although in 2008 lol), JNK Auto does HyChill...

I just called them up now and spoke to Tim. What a champ, he spent like 20mins chatting to me about it explaining it all. Good thing was he was honest and said he is still acquiring his licence to do ac gassing and he doesn't personally do it, his boss does (John). Shows to me he's pretty clued up even though he doesn't personally do it.

Anyway, I'm book in for next week. Their contact number is 9873 2622, located in Mitcham.

Cheers,

Andy

Edit: Quoted $132 GST inclusive for the full works (i.e. full flush, lube and dye, and recharge etc.).

Excellent mate.

Will give them a call for sure. Thanks.

Ok guys, doing the whole works including fault testing, full flush, change of receiver dryer, and gass fill...

John mentioned that they is not point doing the full works if you don't change the receiver dryer as it acts as a filter. All up if all goes well it'll actually be about the $220 mark!!!

The lubricate they'll be using is Wurth Ester Oil with U/V Dye (http://www.wurth.com.au/catalogueview.asp?pdf=A04_0601.pdf). Just done some research and found positive reviews. Better than PAG oil.

Will keep you all posted...

Cheers,

Andy

Edit: Ok, now found that POE = POE Polyolester (type of oil for A/C) according to acronyms.thefreedictionary.com, so if I'm not wrong that means the Wurth Ester Oil with U/V Dye is POE which is what level323 recommends. Hope that's the case!

Edit #2: Found the MSDS for the Wurth Ester Oil with U/V Dye - http://www.wurth.com.au/msds/1892_764_334.htm

Edited by AnDyStYLe

Ok boys, update...

Ran into issues with the a/c where we found out that the a/c compressor sh!t itself... My options where either to repair, replace brand new or second hand. 1. Repair was going to be like $500, 2. Brand new $1k :P , 3. Sourced my own second hand unit for $100 :(

So anyway, I picked up the compressor on Friday morning which we only found out this morning when the original one was removed to be replaced, it was the wrong one. Needed to go back to the wreckers to exchange for the correct one...

Anyway, to cut the long story short... John/Tim from JNK Auto sorted it all out today and has done an excellent job. I am bloody wrapped!!!

All up I spent $260 to JNK and $100 on the second hand compressor. I gotta say JNK looked after me pretty well and would recommend them for sure!

Unfortunately John wasn't too keen on a "group buy" as in his past experiences, many of the people in the "group buy" ruin it for the others by not turning up. John would prefer a individual case by case like mine.

Cheers,

Andy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...